Results 1 to 5 of 5

Thread: Tire pressure

  1. #1
    Join Date
    Jul 2012
    Location
    campbellsville ky
    Posts
    31

    Tire pressure

    Hey guys.
    I was wondering what a good amount of air pressure is. I ride trails. Pretty muddy usually. I just put a new set of razrs on. Any comments are aprechated.,

  2. #2
    Join Date
    Dec 2002
    Location
    englishtown NJ
    Posts
    3,698
    5 psi
    85/86 atc 250r, very modded, lrd 310pv, +1 lsr, shortrack kit, cr250r igntion, 39 pwk, paul turner hi-rev pipe, propeg nerf bars, HREATV custom frame,
    86 atc200x- 84 250r exteneded axle, supertrapp pipe, 27mm carb, works rear shock, 84 250r front end(rebuilt w/ terry kit), 350x tripples, ported head, 12:1 piston, webcam,
    crf450r quad, lsr frame, swinger, antifade, hyper beadlocks and the best of everything else.
    88 trx 250r pced and reinforced frame, +3+0 t-pin, 310pv, cr ignition, 39 pwk, lsr rear end, elka shocks, aftermarket radiator, lrd pipe
    06 ktm450exc, full skid plate/guards, radiator fan, clarke tank, dual sport kit, reg/ins/insp, steering stabilzer
    98 200exc: street plated, skid/guards, dual sport lights, stabilizer and more.
    07 ktm 250xc, skids, reg/ins, dampener, good lights
    2011 atc450r in the works, suspension and details need to be worked out

  3. #3
    Join Date
    Jul 2013
    Posts
    38
    5psi would be enough, try to fill it up with nitrogen.

  4. #4
    Join Date
    Dec 2014
    Posts
    1
    majority of stock grips are held in place by glue and the end caps, which will need to be removed if you are re-installing the new grips on the stock bars. A razor blade or knife will work to cut the old grip, just be extra careful not to add yourself to the things being cut!
    adilo

  5. #5
    Join Date
    May 2015
    Posts
    12
    Taking note of the 5psi. Thanks for the info

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •