hey guys
ive bought some ferrea valves stock intake and plus 1mm ex
the ex seats can just be machined up or do i need to replace seats?
also do i need heavier spring rate or will new oem get the job done
running hc s2 cam
hey guys
ive bought some ferrea valves stock intake and plus 1mm ex
the ex seats can just be machined up or do i need to replace seats?
also do i need heavier spring rate or will new oem get the job done
running hc s2 cam
not sure if the seats need replacing or not but you should be fine on spring rates with that cam.
2005 trx450-houser arms/PEP, 06 swinger, dc-6 linkage, lsr axle, protaper, houser stem, goldspeed wheels and tires, pro armor skids/nerfs/bumper,k&n, 43.5mm FCR, Kohashigawa Exhaust, +1 Ti Intake Valves, +2 Ti Exhaust Valves, CV4 Valve Springs, webcam, CT Racing Head, CB Seats, je 13.8:1, crf ignition, fluidyne radiator, hinson, asv, DID, Supersprox, ccp damper, Twist Throttle.
the seats can be machined they do not need to be replaced the ferra valves are heavier than OEM so if you are a rever stiffer springs would be a good idea.