WTB steering stem for laeger narrow frame

[CorvetteZ06]

Hey guys looking for a steering stem set up for a laeger narrow frame front end. I'm not running a t-pin so the stem needs to have provisions for oem type tie rod ends. Thanks!!

[bigmatt61]

A regular stem will work, it doesn't have to be special. It will just be a pain to get the nut up in there to keep it in place.
Mine (narrow Laeger) had a lonestar stock replacement stem in it when I got it. The previous owner modified the tie rods for standard rod ends at the stem and the heim joints on the opposite end for the pro trax front end.
Good luck.

[CorvetteZ06]

Originally posted by bigmatt61
A regular stem will work, it doesn't have to be special. It will just be a pain to get the nut up in there to keep it in place.
Mine (narrow Laeger) had a lonestar stock replacement stem in it when I got it. The previous owner modified the tie rods for standard rod ends at the stem and the heim joints on the opposite end for the pro trax front end.
Good luck.

Matt check your pm's thanks