heres a link to all the parts still for sale...
the quickchange cover, nacs clamp and hinson pedal are pending
http://s35.photobucket.com/albums/d1...rts/?start=all
heres a link to all the parts still for sale...
the quickchange cover, nacs clamp and hinson pedal are pending
http://s35.photobucket.com/albums/d1...rts/?start=all
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
bump
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
Did the nacs clamp sell?
its pending with the other parts on that list. im waiting to hear back from him...
your in the netherlands right? shipping is probably high. if you want it let me know and ill figure out shipping
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
Lol, no I'm in Iowa lol just thought that was funny...
Let me no beerock, thanks!
heres the first post reposted
my bike has easily over 20k in it so if you understand the value beerock69@gmail.com
Its going on ebay soon, so it will parted out forever. unless someone gives me an offer for the bike in the 8k range
for $9k you get a spare 265 motor and all my extra parts. Oem gusseted 88 frame, oem spindles, hubs, swinwgarm, radiator, shrouds, plastics, seat, tires etc tons of pretty much a complete 250r less the axle, pipe, rear hubs steering stem handle bars and clamp.
I dont care what anyone thinks of the prices for the bike together, I totaled up the parts and even at low prices i have around 8-9k in parts to sell from this part out without including the spare parts
you can see the headstay with stabiizer in this pic
bwr bike
laeger 250r geom frame, fliptop subframe chrome and AC pro peg laeger nerfs 1300 SOLD
laeger -3/4" 88 swingarm 250r link comes with Tm design works swingarm slider black-new, Tm design works chain guide $350
Laeger protrax +3 front with stem with upper mount for steering stabilizer which mounts to headstay 1100 SOLD
Laeger chromoly headstay with steering stabilizer mount and stabilizer shock which mounts to steering stem 250
Axis 19" long travel shocks valved for pro rider, 165 lbs 700
2 Hermann resivior clamps 100
Axis 250r link rear shock santo derisis pro shock needs to be rebuilt 550
dominator +4 race axle 350
Lsr double roller bearing carrier 250
Lsr antifade hub 175
Ac Stadium bumper ?
Ac wide grab bar ?
Nacs steering stem clamp 80
Hardkor cannondale tapered bearing front hubs 300, with Gafler front disc wave rotors- 450
Gafler rear disc rotor 80
Gafler front kevlar brake lines 100
Gafler rear kevlar brake lines 50
Oem ront brake master cylinder 50
Oem honda front brake calipers 200
Oem rear brake master cylinder 100
Oem honda rear brake caliper 100
Oem front red honda fenders with BWR graphics kit 500 I may put these on ebay
Oem rear red honda fenders with BWR race number plates 500 I may put these on ebay
Feather lite custom silver hood with carbon kevlar flames 100
Feather lite custom silver rad shrouds with custom carbon kevlar flames 100
9x9 hiper carbon fiber rims 400
10x5 hiper carbon fiber rims 400
razor 21x7-10 front tires 80
razor 20x11x9 rear tires 80
Ricky Stator 200watt 150
Ricky Stator Rectifier 50
Ricky Stator Lightened Flywheel 100
Ricky Stator Billet handle bar clamp with Lights 200watt 300
Renthal Fat bars 80
Esr billit front motor mounts 80
Esr billit shifter 80
Hinson billit rear brake pedal 110
Curtis sparks TT pipe 200
Curtis sparks silencer 100
Afco oversized radiator with fittings 350
BWR engine: 2500
ct cyl 330
Keihn 39mm
BWR quick change clutch cover
Hinson basket
88 crank - 80 hours on it
cr250 boysen rad valve
10mm reed cage spacer plate
custom R case saver with shifter shaft protection
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
1k for used Axis fronts? Are these Ti springs?
actually the front shocks are 700 not tiOriginally posted by jjohns5
1k for used Axis fronts? Are these Ti springs?
rear shock 550
selling the hipers for 575 shipped have new front rings and rear rings in red with 12 point stainless bolts for front and rear
hardkor hubs and gafler rotors 375
2 antifade hubs 100 ea
bottom end with hybrid transmission 5 w 265 b+b ported cylinder no piston 550
quick change clutch cover with honda quick change cover 350
afco radiator dual pass radiator with fittings 250
bwr 330 motor with broed cases and keihn pwk 39mm car and complete ignition 1500 turn key
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
call me i pm'd youOriginally posted by sameltoe
Lol, no I'm in Iowa lol just thought that was funny...
Let me no beerock, thanks!
Atv Riders Photo Journalist and Atv riders atv specialist
Ride:
Laeger flip top protrax, Axis LT Shocks, Dominator +4 race axle , BWR 330 motor,Keihn 39mm pwk, 178 main, 52 pilot, DGH needle middle clip, Curtis Sparks TT Pipe& Silencer,CFM aluminum airbox, K&N Filter, 98 CR250 Boysen Rad Valve (rad 02b) W/spacer plate,Ricky Stator 200watt,Ricky Stator Rectifier, Ricky Stator Lightened Flywheel,Ricky Stator Billet Lights 200watt, Amsoil Dominator and C12 @ 50:1
soon to have a B+B 320cc ktm rod stroker.
ad me on facebook
BWR part out all parts for sale!
http://www.exriders.com/vbb/showthre...0&pagenumber=4
what year is that rear shock for? and is it standard length eye to eye?