This month is an open month, so here's the link to the mods list, and the rules. I'll put up the poll in a week.
Rules:
http://www.exriders.com/vbb/showthre...hreadid=146713
Mods list:
http://www.exriders.com/vbb/showthre...hreadid=162941
This month is an open month, so here's the link to the mods list, and the rules. I'll put up the poll in a week.
Rules:
http://www.exriders.com/vbb/showthre...hreadid=146713
Mods list:
http://www.exriders.com/vbb/showthre...hreadid=162941
This is my 08 Honda 450ER hope everybody enjoys!!
2004 Honda 400 EX (Blown Up - Sold) - DG Nerfs, DG Bumper, DG Full Skid Plate, DG Swingarm Skid,
OMF Scoops, Pro Taper Handlebars, Pro Circuit Full Exhaust, K&N Filter, Outerwears, Razr's Rear, Razr 2's Front, Steamline Rear Rotor
2006 Honda 250EX - Stock
2008 Honda 450ER - Full HRC Kit, Black HMF Competition Series Slip-On, DG Full Skid Plate, DG Fat Series Rear Skid Plate, Black Pro Taper ATV High Bend SE Handlebars, ODI Rogue Lock-On Grips, ODI Bar Ends, Rox SpeedFX Dash Board, K&N Filter, Blue Outerwear, Pro-Tec MoFlow Airbox Lid, Maxxis Razr Rear Tires, Maxxis Razr2 Front Tires, Candy Blue Blingstar Iron Cross Front Bumper, Pro Armor Kill Switch, Candy Blue Houser XC Nerf Bars,
Chassis | Suspension | Controls:
Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: N/A
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Pro Taper 7/8 ATV High Bend
Throttle/Clutch Lever: Stock
Grips: ODI Rogue Lock-On Grips
Nerfs: Houser Pro Bounce Tree Huggers
Bumper: Blingstar Iron Cross
Grab Bar: Stock
Front Shocks: Stock
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Stock
Tires F|R: Razr Rears and Razr 2 Fronts
Body:
Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: Pro Taper
Fuel Tank: Stock
Skid Plate: DG Baja Series Full Skid / DG Fat Series Swingarm Skid
Engine|Drive System:
Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Cam: HRC Cam
Carburetor: Stock
Air Filter|Box: K&N w/ Outerwears / Stock
Pipe|Silencer: HRC Header / HMF Competition Series
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: N/A
Cooling: Stock
Other: Full HRC Kit
2004 Honda 400 EX (Blown Up - Sold) - DG Nerfs, DG Bumper, DG Full Skid Plate, DG Swingarm Skid,
OMF Scoops, Pro Taper Handlebars, Pro Circuit Full Exhaust, K&N Filter, Outerwears, Razr's Rear, Razr 2's Front, Steamline Rear Rotor
2006 Honda 250EX - Stock
2008 Honda 450ER - Full HRC Kit, Black HMF Competition Series Slip-On, DG Full Skid Plate, DG Fat Series Rear Skid Plate, Black Pro Taper ATV High Bend SE Handlebars, ODI Rogue Lock-On Grips, ODI Bar Ends, Rox SpeedFX Dash Board, K&N Filter, Blue Outerwear, Pro-Tec MoFlow Airbox Lid, Maxxis Razr Rear Tires, Maxxis Razr2 Front Tires, Candy Blue Blingstar Iron Cross Front Bumper, Pro Armor Kill Switch, Candy Blue Houser XC Nerf Bars,
Here's some pics of Logan's CanAm 450 I converted into a 90 Modified and/or Super-Mini for the 2012 AMA-ATVA National Series.
I've installed the KTM dirtbike engine so that I can easily remove it between moto's and install the 105cc engine when that class is ran. Gonna be a busy year......
Pic2
Chassis | Suspension | Controls:
Frame: Stock 2008 CanAm DS450
A Arms: Stock XMX CanAm
Swingarm: Stock CanAm
Steering Stem: Plus one
Stbilizer: GPR puck style
Axle: CanAm XMX 50"
Carrier: Stock Modified double row
Locknut: none
Hubs F|R: Stock
Bars: TAG
Throttle/Clutch Lever: Moose throttle. KTM Hydraulic Clutch
Grips: Pro Taper
Nerfs: Stock XMX CanAm
Bumper: Rath
Grab Bar: Stock
Front Shocks: Fox Float Evol - Factory Upgraded coating
Rear Shock: Fox Podium - Revalved for 100 pound rider
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: DWT Roc Out
Tires: Maxxis
Pic 3
Body:
Plastic: Stock DS 450
Graphics|Seat Cover: SSi Graphics
Number Backgrounds: White with Black numbers - per AMA
Handguards: Not installed yet - Factory CanAm
Bar Pad: Stock
Fuel Tank: Stock
Pic 4
Engine|Drive System:
Cylinder|Head: KTM85 OR KTM105
Bore & Stroke: Factory
Displacement: 85cc or 105cc
Cam: none
Carburetor: Keihin 28mm D-slide
Air Filter|Box: UNI Pod Filter
Pipe|Silencer: FMF Fatty with stock KTM silencer
Clutch|Plates: Hinson
Gearing F|R: 14/48
CDI|Killswitch: PRO ARMOR
Cooling: Engine Ice
Other: Custom handmade nerf nets.
Cylinder|Head: 400ex, stg 2 port/valve work
Bore & Stroke: Factory, wiseco 440 bore
Displacement: 440
Cam: stg 3 HC
Carburetor: 450r
Air Filter|Box: UNI Filter, custom box
Pipe|Silencer: HMF full system
Clutch|Plates: Hinson
Gearing F|R: 14 36
CDI|Killswitch: NA
Cooling: UM over sized tank
Frame: Stock/powdered black
A Arms: 250R chromed
Swingarm: Stock
Steering Stem: LSR Plus one
Stbilizer: NA
Axle: stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: TAG
Throttle/Clutch Lever: Stock modded, polished.
Grips: TAG
Nerfs: N/A
Bumper: TUSK
Grab Bar: Stock
Front Shocks: modded 450r
Rear Shock: Stock
Brake Lines: ASM stainless
Rotors F|R: Stock/Galfer
Rims F|R: ITP .190
Tires: AMBUSH
Enjoy, be nice to win April, since it is my birthday month
John
440ex PPE Stg II headwork, Kibblewhite springs, Crf timing chain, stgIII H cam, Wiseco 11-1, GTT studs, Cometic gaskets, 450 carb, Sparks cdi, Oversize oil tank, LSR +1 stem, LSR +2 arms, , dura-blue X-33 axle, Dura-blue hub/fade/carrier, TAG, Hinson clutch/basket, HMF full pipe, ITP, ASM, IMS, DID X ring, UNI, UM, MAIER, Pro Armor skids, Stainless bolts, brake lines, 450r shocks, Sidwinder, Tusk, Wave.. A lil sprocket work,
Chassis | Suspension | Controls:
Frame: TRP gusset
A Arms: Walsh
Swingarm: Walsh savior
Steering Stem: Houser
Stabilizer: CCP
Axle: RPM d2
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Flexx creech bend
Throttle/Clutch Lever: Honda450 throttle, ASV levers
Grips: Pro taper pillow
Nerfs: Rath
Bumper: Rath
Grab Bar: Rath
Front Shocks: Fox
Rear Shock: Fox
Brake Lines:Streamline
Rotors F|R: Streamline
Rims F|R: DWT
Tires F|R: DWT MXR rear, Maxxis razr cross front
Body:
Plastic: Stock
Graphics|Seat Cover: TRP
Number Backgrounds: SSI
Handguards: Sunline
Bar Pad: Flexx
Fuel Tank: Stock
Skid Plate: TRP
Engine|Drive System:
Cylinder|Head: Walsh, Xceldyne oversize valves, Wiseco duel valve spring, CP 14:1 piston, decked head,
Bore & Stroke: stock
Displacement: 450cc
Cam: Dasa Web cams.
Carburetor: 43.5mm fcr
Air Filter|Box: Pro design
Pipe|Silencer: Nmotion
Clutch|Plates: Hinson
Gearing F|R: 14-36
CDI|Killswitch: Pro armor
Cooling: Stock
Other: Kicker kit, Gutted harness, Full carb set up, TRP beak,
picture 2