Results 1 to 3 of 3

Thread: v force over stock reeds ???

  1. #1
    Join Date
    Oct 2008
    Location
    huron, oh
    Posts
    543

    v force over stock reeds ???

    I am currently running the v force reeds and cage in my cr 85's. I have been told by a few people that stock is just as good, if not better.

    I need to replace the vforce reeds as the petals are fraying. I was thinking of just buying some stock reeds to see if there is a difference.

    Thoughts???
    PROUD DAD OF ZACH ROMELL#7x
    07 yamaha yfz 450
    00 Honda 400ex
    05 drr pit quad

    Thanks to Shawn Snyder for all his help all these past race years!

  2. #2
    Join Date
    May 2008
    Location
    Pittsburgh, PA
    Posts
    144
    Run both... never experienced too much of a difference. Back before 450's when there was only Banshee's and 250r's. I can tell you I had at least it happen 2-3x's a VForce reed break apart in our Banshee and ruin a weekend and never had that problem with any other manufacturer reeds. I am sure allot of those issues with their product though are better and never had that in the cr motor we use.

  3. #3
    Join Date
    Oct 2007
    Location
    Michigan
    Posts
    917

    reeds

    STOCK REEDS. WE EAT V FORCE REEDS ON OUR CR 85 MOTORS. MUSICK RAN STOCK REEDS FOR 2 YEARS AND THEY WORKED FREAT.
    ATV OUTLAWS RACING TEAM, HONDA EAST TOLEDO,COUNTRY GRAINS BREAD CO.,
    ELKA SUSPENSION, FIERCE POWERSPORTS, PRO TAPER,
    GOODMAN RACING. RAGE ENGINES. FLY RACING, WALSH RACECRAFT, HINSON CLUTCHES,FOURWERX CARBON, MAXIS TIRES

    Joe Scarrow trainer/ coach and tech.

    Ryan Korody # 925 2014 450B and Production B National Champion

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •