Suzuki Lt 80 Quadsport "NO" low end power, I have replaced with NEW, air filter, fuel shut off valve, piston/rings/clips/bearing/head & exhaust gaskets. Disassembled/cleaned/inspected carb. Removed/inspected Reed cage. New NGK plug. Removed/cleaned/lubed secondary clutch. Belt is like new. I could not get the primary clutch off but it looks new and shinny and doesn't appear to be hanging up. The only thing I have not done is mess with the Magneto. I have a couple questions I would appreciate any help with...... First; any idea's???? Second; How can I set the timing on this. Third; Will the Lbs of cylinder pressure go up as the rings set because right now I only have 110ft lbs Fourth; Can I replace the Reed cage "phillips screws" with hex bolts and is there a torque spec here? Thanks, email me at testdriverbob@aol.com