Soaking Chain?

[AtvKid4Eva]

Hey guys my brother had a newish chain on his bike and then got a longer swinger so he bought another longer chain. What can i soak his other chain in to get the grease and stuff off without hurting the O-Rings? Thanks

[DnB_racing]

Originally posted by AtvKid4Eva
Hey guys my brother had a newish chain on his bike and then got a longer swinger so he bought another longer chain. What can i soak his other chain in to get the grease and stuff off without hurting the O-Rings? Thanks

i just use a parts cleaner


but you might want to think twice about installing a used chain, on different sprockets, the chain does wear to the sprockets, and a thrown chain can do MAJOR damage,

it would make a ok spare in a pinch, but new quality chain installed properly,
matched with new sprockets are a cheap investment in your lower end

[Scro]

I've always used kerosene to clean my chains.

[01boneless]

Originally posted by Scro
I've always used kerosene to clean my chains.

this!

[AtvKid4Eva]

Well the chain had about 5 rides on it so it's like new just a bit of old oil I wannpa clean. Kerosene won't hurt the o rings?

[01boneless]

Originally posted by AtvKid4Eva
Well the chain had about 5 rides on it so it's like new just a bit of old oil I wannpa clean. Kerosene won't hurt the o rings?

no it shouldent hurt the o rings mine is a oring chain and i soak it. dont use gasoline as it "will" hurt the orings

[D Bergstrom]

I have used kerosene to clean my o-rings chains for over a decade, never had a problem.

Doug

[quad2xtreme]

or diesel fuel.

I don't lube my o-ring chain either short of the WD40 I spray on it after washing. My chains seem to last longer than others who spray chain lube on what is basically a sealed chain if you have an o-ring or x-ring chain.

[AtvKid4Eva]

its soaking in kerosene. Looks like its working great! i will remove it this evening. Thanks guys!

[Smoker]

Wd40 and a chain brush will get it spotless. Chain wax us the best stuff I've used if you follow the directions.