raptor crank/flywheel
This might be posted in the wrong spot but this was the only forum for raptors I found here.
My buddy has a 350 raptor. 2007. Pretty low hours on it. Hasn't been road hard. It came up with a nock and small metal particals in the oil. Really sounded like a rod. A loud solid nock .We took it apart yesterday. I didnt have the puller for the flywheel
so we took the motor to the yamaha dealer here in town and had it pulled off. It was very tight on the crankshaft, not loose in any way. We discovered what you see in the pics. The key way was still intact and was not sliped at all. But the crank and this hub are ruined. The rod was good and tight and all of the tranny gears we good. Can some one explain what happened here?
Sorry for the bad pic of the crank,will try to get better one tomorrow. It looks worse than the flywheel hub tho. Yamaha shop didn't have any idea what caused this.
2002 400ex TT race bike (For Sale)
11:1 Wiesco stock bore, stage 2 hot cam, Pro Circuit Head pipe, FMF power-core 4 slip on, Dynateck CDI, 450R carb 50pilot/180 main, CRJ rear lowering link, Full Flight +2+1 a arms, Lonestar +2 axle,Elka stage 1 fronts, Elka Stage 3 rear, Motion Pro twist throttle, Pep steering stabilizer, Baja skids.,maier Plastic, ITP T-9 wheels, Hoosier/American racer SD-33/razr tt, Durablue swaybar
2002 440ex trail Bike
440 namura 11:1, Stage 3 Hotcam, Big gun CDI, Sparks X6 exhaust, 450R carb, CFM oil tank, roll +1 Swinger, Rpm Carrier, Tusk +2 Axle, Leagers +2+1 A Arms, Houser +1 stem, 450R Front shocks,CRJ lowering link, Durablue front lowering kit, geared 15/38, Maxxis Razars
1997 Yamaha Banshee basket case
a rebuild in progress
2008 Polaris sportsman 800EFI work bike