Hi everyone,
Before installing all the crankcase's new bearings, I would like to know if they need to go flush against the interior of the crankcase or you just insert them as much as you can?
Thanks!
Hi everyone,
Before installing all the crankcase's new bearings, I would like to know if they need to go flush against the interior of the crankcase or you just insert them as much as you can?
Thanks!
-= DS450X MX 2009 =-
"Go Big or Go Home!"
Special thanks to :
E-Sticky Graphics, Sinto Racing, Goudreau Solution Mécanique, Slel Moto Suspension, Contour and Smith Optics!
i ahev no idea BUMP!!!
IM HARD ON EQUIPMENT!
GOON: look pro, go slow!
Spider Graphix, Magic Motorsports, ATVRDIERS.COM, MOM&DAD
****Breast cancer awareness! I love you grandma!****
pretty sure they need to be seated all the way in.
Motorworks G2 Exhaust
Rossier Intake
BCS Porting
Stock Frame Skid Plate
Rath Bumper
Rath Grabbar
Rath Nerfs w/ Rear Nets
Houser Long Travel A Arms
Fox Float Evols
Fox Podium
DWT Rockout
Goldspeeds Blue Lable SX
Goldspeeds Blue Lable MXR
DWT G2 Beadlock
Adjustable Stock Axle
Precision Steering Stabilizer
BRP Louver Kit
Fasst Flexx Bars
Sponsers: Other Guy Racing, Motoworks, Thede Photography, BCS Performance,Leatt, also wanted to say thanks to Warnert Racing they are a great bunch of guys
It would be a GOOD idea to check your crank for truness or have it checked. those cranks move around and i think that is what tears up the bearings