Results 1 to 8 of 8

Thread: desperately need help

  1. #1
    Join Date
    Dec 2003
    Location
    pioche,nv
    Posts
    1,392

    desperately need help

    brand new 2011 drr 50R with a uni pod filter.

    won't run right . down hill it runs like a champ but on level ground it is real slow going then after a bit kicks in and runs fast. will not climb hils and starts slow on the flat.

    already removed the strap on the cdi.

    checked jets it had a 105 main and a 38 pilot.

    put a 112 main and ran better changed it to a 120 and ran even better but still not right

    any advice.
    RECREATION TIRES
    www.rectires.com

  2. #2
    Join Date
    Jan 2005
    Location
    Michigan
    Posts
    821
    it likely needs a new spring in the rear clutch.
    aka RB Racing

  3. #3
    Join Date
    Dec 2003
    Location
    pioche,nv
    Posts
    1,392
    it's brand new fresh out of the crate.
    RECREATION TIRES
    www.rectires.com

  4. #4
    Join Date
    Apr 2010
    Location
    NW Wisconsin
    Posts
    167
    Originally posted by machwon
    it likely needs a new spring in the rear clutch.
    Ill second that.
    I dont need a signature yet.

  5. #5
    Join Date
    Mar 2009
    Location
    Delaware
    Posts
    614
    take one of the roller wghts out and see if it improves if that works that means your heavey on the rollers wghts does it have a slipper sprocket make shore its tihgt and what sprocket ratio you running

    PROUD PARENTS OF BRODEN CARNEY #17


    2008 Maryland State Championship - 1st place (50cc)
    2009 Maryland State Championship - 2nd place (70cc)
    2010 Maryland State Championship - 2nd place (70cc) 2011 maryland state championship - 1st place (70cc)
    2008 D7 - 4th in points (50cc)
    2009 D7 - 2nd in points (70cc)
    2010 D7 - 1st in points (70cc)

    Sponsors:
    Elka Suspension
    Spy Optics
    Tag Metals
    DWT
    EVS
    Rebel Gears

    Special thanks to Marc Smith @ Hot Quads for tech help

    Special thanks to Marvel's Portable Welding in Frankford, DE

  6. #6
    Join Date
    Dec 2003
    Location
    pioche,nv
    Posts
    1,392
    stock slipper and stock ratio.
    RECREATION TIRES
    www.rectires.com

  7. #7
    Join Date
    Mar 2009
    Location
    cherry valley
    Posts
    956
    the stock setup is lame
    like all have said step up a new torsion spring
    since you have it in your hands some new clutch shoe springs to match!
    when u are buying that stuff get a couple new retainer nuts for all 3 points
    hope this helps!

  8. #8
    Join Date
    May 2008
    Location
    Cumming, GA
    Posts
    691
    What fomo said. The clutch out of the crate is trash and likely the rollers are too big. Do what someone said and take 1 roller out and see what happens. If it helps, time to clutch it up proper.
    Proud Dad of Ethan Ahlm #22
    -2010&2011 ATVA 50cc limited National Champ
    -2010 S.E. Quads 6&under Regional Champ

    Rider Home Page:
    http://www.hookit.com/members/ethanahlm/

    Thanks to:
    2011 Team Hetrick National Rider
    Amsoil-----No Fear-----Pro Grip-----Motowoz-----DWT Racing
    Gaerne Boots-----GoPro Cameras-----Engine Ice-----Leatt Brace

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •