What upgrades are recommended for the Pitster 125 HO engine?
Head, Carb, Ignition, Gearing, Ect.
My grandson races XC
Mike Ferguson
Melbourne, Florida
What upgrades are recommended for the Pitster 125 HO engine?
Head, Carb, Ignition, Gearing, Ect.
My grandson races XC
Mike Ferguson
Melbourne, Florida
That's what we are doing. Also suspension upgrades would be helpful.
#7 Christian Horne
www.christianhorne7.com/
2008 ITP Moose Racing ATVA MX Series
70 CVT CHAMPION
2012 AMA/ATVA MX Series
450 C Class - Sozuki 450
Riding in Memory of Justin Brown
Thanks to our 2013 Sponsors
Specialty Gold Promotions + Maximum RPM + 488 Web Design
Get a hold of this company. A few of us have already sent our engines to him to have modified. Our pal Rob highly recommended him to us. They seem so much cheaper to build than the CVT stuff.
http://www.firepowerminis.com/index.html
Tom at ATV Fourplay makes some serious XC and MX suspension for the Pitster
#7 Christian Horne
www.christianhorne7.com/
2008 ITP Moose Racing ATVA MX Series
70 CVT CHAMPION
2012 AMA/ATVA MX Series
450 C Class - Sozuki 450
Riding in Memory of Justin Brown
Thanks to our 2013 Sponsors
Specialty Gold Promotions + Maximum RPM + 488 Web Design
Originally posted by quadnana7
Tom at ATV Fourplay makes some serious XC and MX suspension for the Pitster
Do you know what the Mods typically are?
Also do you know the brands and model numbers of the aftermarket parts that are being used to make these things run?
I appreciate your input.
Mike Ferguson
Melbourne, Florida
I do not. I would give Terry at FirePower a call and he'll help you out.
Originally posted by MRFERGUSON
Do you know what the Mods typically are?
Also do you know the brands and model numbers of the aftermarket parts that are being used to make these things run?
I appreciate your input.
Mike Ferguson
Melbourne, Florida
Mike, Tom hit the nail on the head. There is (and I emphasize) NO engine builder out there that knows or can do things with these China engines like Terry at FirePower can. It's alot more to it than your normal port/polish and valve job. We're also here in Florida and he has been building our setups for the past year. We race at Dade City so you know we run against some high dollar machines. With the Pitster, Firepowers engine, and Toms suspension the bike is hands down one of the best performing machines you can get in a mini other than probably a JB mod.
If it'll run... I'm ridin'!!!
http://home.earthlink.net/~hotscott03/
Sons:
Jhamir "JAM" Scott #320
KX85
Sponsors:
Firepower Minis Motors
Pirelli
Artistic Apparel
Smith Optics
Athena
DeCal Works
PitPosse
AGV Helmets
Signs A Rama (Lakeland)
ASV Inventions
Dirtyfoot Adventures
O'Neal USA
TwinAir
OneNation Extreme
R1R Performance
C4 Suspension
Are the Elkas special for Pitster Pros or do other model quads shocks fit these?
I know the ones we run with the Atv Fourplay suspension are specific for that suspension. As far as on stock a arms and swinger AtvGalaxy on ebay sells elkas for the Pitster. All different stages of them. You might be able to find out some info from them. If not measure your eye to eye measurement of stock shocks. They need to be off the quad to get a good measurement. Then maybe reference them versus other quads.
Adam McGee Racing 11 running 2 Pitster Pro's and a Xtreme custom flat tracker. Thanks Firepower Minis, Tbolt Usa, Atv Fourplay, Pitster Pro BRM Offroad graphics, Titain Motorworks , Motocross Vests Champions Choice
Moto X Outcast 2012 90cc 3rd place
Steve Nace Indoor Winter Nationals St and TT 2011-2012 and 2012-2013 2nd place.