400ex oil?

[yz2stroke]

just got a 400ex. need to know how much oil it suppose to hold. and does it all just go into the oil resovar in the front? thanks

[honda400ex2003]

2 quarts if doing the filter too.

you have to do the tank drain, the oil filter, and a plug underneath the shifter.

http://www.atvriders.com/articles/oilchange400ex.html


steve

[honda400ex2003]

http://www.atvriders.com/articles/index.html


^^^^there are some other good 400ex articles also including valve adjustments.




http://www.sendspace.com/file/wcy9is

^^^ manual download which is a good thing to have around also. it shows anything that needs to be done to a 400.

enjoy! steve

[yz2stroke]

so 2 quarts will be fine? do i put it straight in the oil resovar?

[honda400ex2003]

yup, just put 1 qt in and start it up for about 20 seconds or so. then add the other qt to it. the res tank wont take all 2 qts at the same time without getting some pumped back into the engine. steve

[slightlybent47]

Originally posted by yz2stroke
so 2 quarts will be fine? do i put it straight in the oil resovar?

Yep, you got it!

[CJM]

I put in about 1.5 qts, then I like to hit the kill switch and crank it over a few times so it pumps the oil into the engine before starting it.

Then let run a min, and add the last 1/2 qt.

[yz2stroke]

ok thanks guys appreciate it.

[99400esex]

Be careful not to over-tighten the plug on the botton of the oil tank, sucker breaks easy.

[CJM]

Originally posted by 99400esex
Be careful not to over-tighten the plug on the botton of the oil tank, sucker breaks easy.

or the ones on the case where the filter is.

Use a 1/4 drive ratchet and grip the head in your palm. 8 ft-lbs iirc.