Page 1 of 16 12311 ... LastLast
Results 1 to 10 of 154

Thread: 250r/400ex hybrid...

  1. #1
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966

    250r/400ex hybrid...

    i am in the begining of a hybrid consisting of a 400ex chassis and a 1986 250r engine. i had some stock parts left from my 1999 400ex build up throughout the years, along with a couple extra 86 250r motors i acquired after the purchase of my 250r in 2002.(i think it was '02.)

    anyways, i will have pics of mediocore quality(cell, no digital). i hope to answer questions and maybe get some help if needed.
    If you can't modify it why have it???

  2. #2
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    here is a side view:
    Attached Images Attached Images
    If you can't modify it why have it???

  3. #3
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    other side: you can see i used two right side 400ex mounts and removed a section from each to clear cases.
    Attached Images Attached Images
    If you can't modify it why have it???

  4. #4
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    the radiator has been modded to allow better access to filler neck. the outlets were switched to the opposite side in the same location. now the filler is on the left.
    Attached Images Attached Images
    If you can't modify it why have it???

  5. #5
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    another view of radiator:
    Attached Images Attached Images
    If you can't modify it why have it???

  6. #6
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    some random pics:
    Attached Images Attached Images
    If you can't modify it why have it???

  7. #7
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    ...
    Attached Images Attached Images
    If you can't modify it why have it???

  8. #8
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    the ESR TRX-6 pipe. needs rechromed. the mid pipe will need an inch section cut out and rewelded to clear the inner tie-rod end.
    Attached Images Attached Images
    If you can't modify it why have it???

  9. #9
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    zoom. the pic may be decieving but there is no interference issues with the a-arms throughout the travel.
    Attached Images Attached Images
    If you can't modify it why have it???

  10. #10
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    closer pic of left side motor mount:
    Attached Images Attached Images
    If you can't modify it why have it???

Page 1 of 16 12311 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •