Page 1 of 7 123 ... LastLast
Results 1 to 10 of 62

Thread: TRX954RR build

  1. #1
    Join Date
    Nov 2009
    Location
    KCMO
    Posts
    94

    TRX954RR build

    Well winter is here. Time for a new project. How bout a TRX954RR.

    I'm a 250R junkie. With that said. I don't think the other two sites I frequent would enjoy this thing as you guys would.

    I have a CR500 in a JP TRX now that is fun but I'm looking for more.
    Have the day time duner for play. The night time duner with some big ***** lights.
    Now it's time for some more speed.
    At first I was going to mod the JP frame to exepct a 954 engine.

    But two problems:
    1 Is the hight difference in the frame and engine. Which can be fixed with some cut and reweld leading to the second.
    2 I don't really want to cut up a perfectly good JP frame. I have enought spare parts to build another nice night rider.

    So I decided to build a frame.
    Here are some of the first versions of my vision.

    When done I want it to look like a TRX250R with a monster in it.
    It'll keep the front suspension with a few upgrades, factory plastic, seat, and such.

    Highlights of the over all plan:
    Stretch the noise 10 to 12 inches.
    1 x .095 or .065 4130 main tubes.
    3/4 x .065 or .058 4130 supports.
    +8 or +10 inch swinger.
    1 x .095 for the swinger.
    Swinger mount, 954RR bearings in 2 x .250 turned to except the bearings and seals.
    520 chain, 15/56ish sprockets.
    I have a set of 24" 14 paddles from the 500.
    4 single or 2 dual inlet K&Ns.
    Bent tube mounted to the throttle bodies to locate the K&Ns in the area behind the cylinders.
    Factory header, modded mid pipe, and a Two Brothers.



    This are just some first rough drafts.
    I've started to bend some mock up tubes last week.
    After the holidays I should have some time to see what fits and what doesn't.

    I'm open to ideas and suggestions. Looking for a name for this thing too.
    11 TRX954RR build in progress
    85 Missile310R
    88 TRX330R
    05 TRX400EX
    06 TRX400EX
    06 TRX500R disassembled
    02 TRX250EX sold
    02 CBR954RR

  2. #2
    Join Date
    Feb 2005
    Location
    PA
    Posts
    3,552
    man i love builds like this. looken good. i started a solid works drawing for a buggy but havent had time to work on it. keep us updated.
    04 dodge cummins 6 speed
    Houser crf hybrid
    08 trx450r

  3. #3
    Join Date
    Jan 2009
    Location
    pittsburgh
    Posts
    2,966
    this should be interesting. it sure wont be a sleeper with the big motor in it but will definitly be cool.
    If you can't modify it why have it???

  4. #4
    Join Date
    Nov 2009
    Location
    KCMO
    Posts
    94
    A few crappy cell phone pics.









    I'm still in the mock up stage. Made several revisions.



    On my 5th set of upper bars now. Sure glad this tube's 85 cents a foot instead of $4.85 a foot.
    Getting ready for the 6th set.
    11 TRX954RR build in progress
    85 Missile310R
    88 TRX330R
    05 TRX400EX
    06 TRX400EX
    06 TRX500R disassembled
    02 TRX250EX sold
    02 CBR954RR

  5. #5
    Join Date
    Feb 2008
    Location
    Erwin, NC
    Posts
    60
    What program is that you are using on the computer to layout the frame? Also where can it be purchased? Build looks good!

  6. #6
    Join Date
    Nov 2009
    Location
    KCMO
    Posts
    94
    Bend Tech PRO is what I'm using. It's very user friendly compared to SolidWorks and the such.
    http://www.2020softwaresolutions.com/products.htm
    There's a 12 min screen shot video. Well worth the time to watch.
    There is also a site with a ton of info on the software, benders, and dang near anything to do with fab.
    http://www.offroadfabnet.com/
    11 TRX954RR build in progress
    85 Missile310R
    88 TRX330R
    05 TRX400EX
    06 TRX400EX
    06 TRX500R disassembled
    02 TRX250EX sold
    02 CBR954RR

  7. #7
    Join Date
    Apr 2007
    Location
    Little Apple
    Posts
    3,380
    Sider that's looking awesome!! Nice build so far, hopefully I'll see you running that beast down at Waynoka in the not so distant future!!!
    496cc Saber 2 Stroke MX Project "Elsinore" (Laeger Narrow/CR500 Build - In Process)
    89 TRX 250R - Fully Restored Original

  8. #8
    Join Date
    Nov 2009
    Location
    KCMO
    Posts
    94
    Thanks TB.
    Plan is to have it done for the Spring trip. Keeping my fingers crossed.

    Here's some more pics.
    This are of the final lower section, fully welded 4130. Plan on having the arm tabs done by mid week.





    11 TRX954RR build in progress
    85 Missile310R
    88 TRX330R
    05 TRX400EX
    06 TRX400EX
    06 TRX500R disassembled
    02 TRX250EX sold
    02 CBR954RR

  9. #9
    Join Date
    Jun 2009
    Location
    Powell Wy.
    Posts
    72
    Its looking pretty damn cool. This is the type of fire breathing monstor I would love to owen and ride. and what better spot then at St. Anthony ID. Seen lots of monstors there (mainly turboed 700 raptors) but they dont seem reliable, you dont see them out running the dunes, only being towed to and from thunder mt.
    08 525IRS, FMF 4.1 slip on, JD jetting kit, opened up the air box, 570 big bore kit and NOS.

  10. #10
    Join Date
    Feb 2008
    Location
    Erwin, NC
    Posts
    60
    Originally posted by siderbox
    Bend Tech PRO is what I'm using. It's very user friendly compared to SolidWorks and the such.
    http://www.2020softwaresolutions.com/products.htm
    There's a 12 min screen shot video. Well worth the time to watch.
    There is also a site with a ton of info on the software, benders, and dang near anything to do with fab.
    http://www.offroadfabnet.com/
    Thanks man I'll check it out.

Page 1 of 7 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •