89' trx250r part out -cheap!-

[trx310R#24]

(low hours) burgard +1+3 a arms-$250
stock 89 linkage-$50
durablue axle-$120
rims/tires f20" r18"-$200
89 frame-$250
FMF pipe/silencer-$150
front plastic race cut-$50
grab bar-$25
rebuilt last summer fr brakes sys-$120
rebuilt last summer r brakes sys-$100
stock swingarm-$60
airbox-$45
stock red tank-$65
dg nerfs-$35
rad-$60
after market twist trottle-$35
pro design kill switch-$15
sprockets/chain-$20
66.00mm stock cylinder/head-$100
stem mount-$15

[trx310R#24]

[croat1]

can you get a pic of the axle out of the rear end? are the bearing surfaces good? bent? whats all included with the axle? hubs...
thanks

[trx310R#24]

Originally posted by croat1
can you get a pic of the axle out of the rear end? are the bearing surfaces good? bent? whats all included with the axle? hubs...
thanks

all hubs are included.. bearing surfaces are good and it is not bent. ill get you pics.

[rayman375]

How are the bearings in the swinger? Is the chain guide and linkage included? Are there any cracks?

[destey]

would you be willing to separate out the sprocket hub?

[LathersR]

200 shipped for arms? paypal? they come with tie rods, ends, arms, and lines?

[bulldog diesel]

on the a-arms? 3+ 1+ 3 wide? 1 forward?

[bulldog diesel]

what condition and what year are the cyl and head you have for sale?

[trx310R#24]

Originally posted by bulldog diesel
what condition and what year are the cyl and head you have for sale?

the head and cyl should be an 89.

and they are in good condition cylinder may need honed... but it looks clean.