Does anyone have drawings or anything on how to build a starting gate?
Does anyone have drawings or anything on how to build a starting gate?
ok i got a question for you... are you using this gate for practice and if so how are you planning on dropping the gate and taking off at the same time...
06 honda 450r
hey i got ur message and my reply wouldnt go thru so im just gonna reply on here... well i dont have any drawing of one but if ur wanting to practice ur starts i would just paint a area big enough for your bike and just take off out of that
06 honda 450r
you would obviously have to have another person helping with the gate drops.
Not necessarily, I could easily design something that would drop the gate at a random time during a given interval.
But it would require a microprocessor control, and some air or hydraulic actuation, so it would add $100 or so to the price, but it could easily be done.
Duncan Racing 340PV, +2 A-arms, +4 LSR axle, and a host of other goodies.
I know how a starting gate works I don't any help with that I'm just looking for a set of drawings to build one without have to design one from scratch
This was taken way off topic, anyone really wanna help him?
- 2008 TRX400EX
- Lexx MXe
- UNI
- ASV Clutch/Perch
- MQ Blockoff
- Open box
I can't help you with a drawing, but check out riskracing, they make personal starting gates the operate electronically, it may be what you are looking for.
"I WANNA GO FAST"