raptor 50

[jtmxzx]

What is the best way to make this 50 a little faster ?

[yfzfelix]

I have been told that if you use the cdi off the raptor 80 they will go from 11 MPH to 22 MPH, I have not tried it yet but will once the kid gets used to the quad

[atvingnc]

The single largest performance gain you'll get is to change the carb. slider and throttle cable lever arm to a raptor 80 one. this will give the machine full throttle capability. then change the CDI to a raptor 50 or raptor 80 high rev version. I would highly suggest you add a set of wheel spacers as the machine can be unstable around tight corners with its new found performance.

[jtmxzx]

Do you know what the part # would be for the cdi. ? the guy at the dealer was kind of worried about witch one to order..thanks for your help...jt

[yfzfelix]

I did not know there was a hi rev version cdi , can you be more specific, are you talking oem or aftermarket ? I was thinking about making some wheel spacers, are there some avaliable aftermarket ? Steve

[hasbeenttduner]

As far as the wheel spacers go for a kids play quad you can get the lug extenders off of e bay for around 25 a set shipped to you. You would need one set for the front and one for the rear. I have seen some listed for the raptor 50. Make sure you get the correct lug size and thread pitch for your quad.