WE have an Yamaha 250 Moto 4 and it smokes really bad, and its blue can anyone help with what might be going on or know how to fix it thanks
WE have an Yamaha 250 Moto 4 and it smokes really bad, and its blue can anyone help with what might be going on or know how to fix it thanks
Honda 300ex:
K & N Filters
Pro Taper Grips
Tusk T-10 Red HandleBars
Factory Effect Donut
Grips
Tusk HandGuards
14 Tooth Front Sprocket
18 Inch Kenda On Douglas .190
Outerwear Prefilter
Motosports Nerfs
Razr Cross On ITP Wheels
Pro Armor Kill Switch
D.I.D Chain
Full HMF Exhaust
* Atvs Dont Kill People. Stupid People Kill Themselfs On Atvs*
*GO HARD NEVER GIVE UP*
Originally posted by hondaracing0144
WE have an Yamaha 250 Moto 4 and it smokes really bad, and its blue can anyone help with what might be going on or know how to fix it thanks
main problem........ its a YAMAHA duh.... second and the real problem its the rings... if it smokes when you leave off the gas then its valve seals if it smokes when you give it gas then its deflently the piston rings.... put new rings in it before you hurt the bore
440ex/with JE 12.1 piston/old syle stage2 cam hot cam/port&polish ported head/hotrods crank/2degree timing key/no base gasket for beter deck height/k&n filter with flow kit/fmf power core4 shorty cut down 4in./powerbomb header/dynojet kit MJ185 pilot jet45/ 1/4inch intake spacer/ choke removed/16T 36T sprockets/dougless polished rims 22/6/10 fronts/ 20/10/9 rear holeshots/ tripple rate works front shocks
build on the cheap
2003 banshee.. 60 over wiseco pro lite pistons, FMF fatty pips and silencers, boost bottle, boysen reed pettles, K&N filter, vitto key, jetted stock carbs, plus2 durablue axle, 1.5 spacer for the front.. i have 35 mill keihin D slid carbs not installed yet... and soon to be head milled... i have 675 dollars invested into it!!! including the bike!!!
can u put anything in the oil to make it stop smoking
Honda 300ex:
K & N Filters
Pro Taper Grips
Tusk T-10 Red HandleBars
Factory Effect Donut
Grips
Tusk HandGuards
14 Tooth Front Sprocket
18 Inch Kenda On Douglas .190
Outerwear Prefilter
Motosports Nerfs
Razr Cross On ITP Wheels
Pro Armor Kill Switch
D.I.D Chain
Full HMF Exhaust
* Atvs Dont Kill People. Stupid People Kill Themselfs On Atvs*
*GO HARD NEVER GIVE UP*
Originally posted by hondaracing0144
can u put anything in the oil to make it stop smoking
nope not in somthin like that it wont help... rings are only 30 bucks at most thats the best way to go... your guna need a head gasket base gasket and vavle cover gasket also... get it done before it gets to sloppy
440ex/with JE 12.1 piston/old syle stage2 cam hot cam/port&polish ported head/hotrods crank/2degree timing key/no base gasket for beter deck height/k&n filter with flow kit/fmf power core4 shorty cut down 4in./powerbomb header/dynojet kit MJ185 pilot jet45/ 1/4inch intake spacer/ choke removed/16T 36T sprockets/dougless polished rims 22/6/10 fronts/ 20/10/9 rear holeshots/ tripple rate works front shocks
build on the cheap
2003 banshee.. 60 over wiseco pro lite pistons, FMF fatty pips and silencers, boost bottle, boysen reed pettles, K&N filter, vitto key, jetted stock carbs, plus2 durablue axle, 1.5 spacer for the front.. i have 35 mill keihin D slid carbs not installed yet... and soon to be head milled... i have 675 dollars invested into it!!! including the bike!!!
u know a site ive been looking
Honda 300ex:
K & N Filters
Pro Taper Grips
Tusk T-10 Red HandleBars
Factory Effect Donut
Grips
Tusk HandGuards
14 Tooth Front Sprocket
18 Inch Kenda On Douglas .190
Outerwear Prefilter
Motosports Nerfs
Razr Cross On ITP Wheels
Pro Armor Kill Switch
D.I.D Chain
Full HMF Exhaust
* Atvs Dont Kill People. Stupid People Kill Themselfs On Atvs*
*GO HARD NEVER GIVE UP*