Results 1 to 2 of 2

Thread: Arctic Cat Powler xtz 1000

  1. #1
    Join Date
    Dec 2007
    Location
    Kansas
    Posts
    7

    Arctic Cat Powler xtz 1000

    I'm at the 10 hour mark for break in.Going to change the motor oil and filter.My question is do I have to use the Arctic Cat ACX All Weather synthetic oil they recommend ? Also is there a cross over number for another brand oil filter.How about tie rod ends and belts.NEED TO BUY EXTRAS.Prowlers rule ! Let me know.Thanks Wayne
    Bikes;1979 xr 80 Honda,1983 Goldwing(Aspencade)Honda,2000 TE 610/e Husqvarna DS,2001 EXC 520 KTM,2003 SX 525 KTM,2006 XC-W 200 KTM (2 stroke lives), ATV ; 2008 XC 525 KTM,UTV; 2009 Arctic Cat Prowler XTZ 1000

  2. #2
    Join Date
    Jun 2004
    Location
    minnesota
    Posts
    161

    stuff

    i dont think you need the acx but i would use a oil that has the the correct rating in the owner manual. as far as tie rods they have come out with a new one that looks to fix the ends and from bending them at the treads. remember if its to tough you will just bend something else. belt no sure but have had good luck so far with my knock on wood.
    2006 LTR450(MX) HMF pipe,UNI filter,Cherry BOMB
    2006 LTZ400(xc) Ohilins front shock, yosh pipe UNI FILTER, Razr 2s, and hipers all around
    2010 Sponsors: Division 26 clothing,SCOTT goggles,ONEAL gear,FOUR gear, Osirus Shoes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •