Frequently asked 450R questions/thread!s

[tritty_wall]

does anyone have a picture of the Green wire and Tors mod? I just don't want to start cutting wire until I know for sure what I'm doing. I Get that i just have to cut the green one just not sure which end go where when doing the tors like DnB_racing has explaned.

Thanks, Tristin

[DnB_racing]

does anyone have a picture of the Green wire and Tors mod? I just don't want to start cutting wire until I know for sure what I'm doing. I Get that i just have to cut the green one just not sure which end go where when doing the tors like DnB_racing has explaned.

Thanks, Tristin

http://www.google.com/url?sa=t&rct=j...INj2lXli2S2nqg

ok that's obviously the green wire mod....

now instead of isolating both sides of the green just isolate the cdi side
now on that same connector there is a grey/red wire-cut it
take the green from harness side and splice to grey/red from cdi side
isolate the harness side grey/red wire and you've bypassed the carb safety at the closest possible point

use heat shrink and solder for your connections tape over and its done

3 minute job tops.... simple

[rollie]

Wow i made this 5 years ago haha.....i hope it's helped some people i still have a 450r! Haha