Hagerty intake

**qcitytile** · 11-22-2009, 07:11 PM

did you have to re jet carb and tune cvt or was you close after just bolting on?? I've only started ours because of the filter not fitting. Maybe I'll just get the kx boot!!

**qcitytile** · 11-22-2009, 07:14 PM

I couldn't tell you if its leaking because I dont have a leak down tester. Its next on the list. If theres another way to check let me know. By the way great post!!!

**don bassani** · 11-23-2009, 02:32 PM

Spray starting fluid around manifold while idling,if rpm changes or stalls you have a leak.

**don bassani** · 11-23-2009, 02:42 PM

I got my intake from hetrick,it came with proper screws and carb,jetted and with proper throttle cable.20 minute install.Rich did all the leg work so it was easy as it was a complete kit.No air leaks either.

**qcitytile** · 11-23-2009, 05:25 PM

basani did you use the kx boot or the alum adapter??

**don bassani** · 11-23-2009, 05:44 PM

boot

**thequadfather+2** · 11-25-2009, 03:24 PM

Here's a link to photobucket. The video is an edit I did while my 6 year old was playing around on his 70. This is the one we just put the intake on. You can hear the RPM's really climb a few seconds after going WOT. I cant tell if we robbed any bottom end yet but when it comes alive you can sure tell it. You can really notice it when he makes a u-turn in the gravel and pins the throttle each time. need to turn up the speakers to really hear it.

The 70 is a 2009 with a stage 6 sport pro cylinder kit, pcs pipe and stage 6 adjustable clutch with 3.5 rollers. It's jetted 118 / 45 / needle #2 from the top.

http://s118.photobucket.com/albums/o...gtheintake.flv

**selbygirl** · 11-29-2009, 11:11 AM

can you run the stock reeds and cage with the kx boot with some modifcation done to the cage i herd someone in tennesse had a set up like that and it worked very well just wondering if eny one else have tried it and what modifcations they did to the cage

**Hetrick Racing** · 12-02-2009, 05:53 AM

No you cannot run the stock reeds,or did you mean stock kx reeds instead of v-force then the answer is yes.
There are other intakes out there that run stock or Koso style reeds though,one of them is very close in appearance

**Reimer Racing** · 12-02-2009, 06:10 AM

After talking to Wayne Hagerty he said we should be using the KX 60 boot. That way the throttle cable will not be up against the frame.

Thread: Hagerty intake

Thread Tools

Display

link

Posting Permissions