Hagerty intake

[thequadfather+2]

In the end I had to put it on and take it off several times, make tools and alter the bolt just a little before it finally it passed a leak down test. Havent used it yet, maybe this weekend but I thought I would share my install now. Getting it to seal and that dang bolt in the front was a pain in the butt.

[BradLoomis]

Use a standard 6mm hex bolt and flat washer on the slotted bolt side. You can then use an end wrench to get in there. You can also get a reliefed hex head that has the hex slightly raised, so that a flat washer isn't needed.

hows the levelness of the carb and does your throttle cqable get all jammed up ion the top frame rail

[DAVYS DAD]

anyone have this on a dyno yet? I know a few shops have and are claming 1.5-2.0 hp that would sell me on it.not to impressed with installiton though!

later

[bulldogfallon]

Marc from Hot Quads tried his yesday on a2 fast kit and wasimpressed with results

We are fitting ours this weekend

[Coley'sdad#8]

quadfather, those are called pan head / button head hex drive machine screws. in case you were to call around trying to find them you would know what to ask for.

[FISH ON!]

great thread quadfather. thanks for taking the time to share the info.

Todd

[Coley'sdad#8]

yeah that was a good thread quadfather,
Yunno ummmm Christmas is almost here and somebody might have some complicated toys to put together so could we put in requests and you give us some good picture / instructional threads on toy assembly

[thequadfather+2]

I know Marc and Gary and several others do it everyday but maybe this will be helpful for the average joe's.

Here's a couple more pics, the carb sits pretty level and doesnt seem to stick out excessively. The cable was a little more crowded but not bad, I just moved it to the outside of the frame rail and it seems to be OK.

I spoke premature, still having trouble sealing the area around the intake where the slotted bolt hole is. It is sealed everywhere but there. I am gonna try a new gasket more RTV and a hex head with a washer this time.

[thequadfather+2]

again