ex/ yz426 hybrid part out
Part out
2000 yz 426 with 446 big bore cylinder, new vortex 12 to 1 piston with less than 2 hours on it, new water pump impeller shaft and seals, new third gears and all shift forks, hot cam auto decompression exhaust cam, aftermarket flywheel, tusk heavy duty clutch plates and springs very stout motor, will sell motor, carb, all electronics, throttle cable, clutch cable for sold
Dr d full exhaust modded to fit 400ex frame and motor, silencer shortened about 2 inches, sold
custom aluminum air box built by ss400ex for swap with uni filter, $50
custom aluminum oil tank in L shape, goes in front and under radiator, will have to weld mounts to your frame, $100
PWR 250r over sized aluminum radiator couple of the nipples that goe through the mounts have been welded on so that would need to be fixed. i built upper and lower cradle mounts for the radiator. $150 on ebay now
i will sell all listed above so you have everything to drop the motor in and be ready to run. this will include the front motor mount horns made of aluminum and also built by ss400ex for $1100
front a-arms, houser plus 3 long travel, chrome uppers and candy blue powder coated lowers, powder is a few years old but is still in pretty good shape $350 on ebay now
front shocks, custom axis long travel, tripple rate, remote rezzies, adjustable compression and rebound. i bought these shocks from stocktires here on the forum. they were totally rebuilt invluding new shafts, springs have new powder coat and they have quad tech carbon fiber shields on them, they are 19 inches long and came off a jb frame with 250r geometry. they were a little soft on our 400 frame. no time on these shocks. $650 on ebay now
LSR chrome steering stem with anti vibe clamp, straight, $100 sold
LSR plus 1 1/4 swing arm, has a couple of small cracks that have been welded but has held up for a couple of years now, comes with dual row bearing carrier. sold
rear shock, TCS zps with remote rezzie, compression and rebound adjustablle. for 1 1/4" extended swinger and 175 pound A class rider $250
rear 9 inch baha rims with 18 inch kenda klaws on them. 80% tread left.
$150
front baha rims with 20 inch kenda klaws. rime are 4 and 1 offset. 80% tread left, $175
front and rear yellow maier race cut plastics, red tank cover. have k & k tribal flame graphics on them. right rear fender cut to clear kicker. pretty good shape. $100
Ac non pro peg nerfs, needs 1 net, $50.
lsr plus 4 axle, little play in sprocket hub but it is the hub not the axle. straight, $100
i am keeping all the front brake parts for a project. if you need anything else such and spindles, hubs or so forth make me an offer. prices do not include shipping and if paying with pay pal add 3% to cover fees. i can send you a link of a lot of build pics of this quad if interested or i will add it to this post later.
Mark at quaddad@bellsouth.net or 228-832-0474
" A good friend will bail you out of jail but a true friend will be sitting beside you saying.... Dang that was fun"
Mark
Bubba ( son )
2005 YFZ450, 08 motor,Bike cam, Laeger Plus 2 a-arms, Elka shocks, GYTR Exhaust, Holeshots on Baja rims, AC Pro Pegs, G- Force axle
2009 Sponsor: Asv, SixSixOne. Oneal Racing, Houser Racing, GT Thunder, Nacs Racing, Elka