LOTS of KTM Parts

[cheetah]

Due to some recent circumstances it looks like I'm gonna be getting out racing. I have a lot of spare parts stocked up and will be selling 2 quads as well. Here is a list of parts I have. All are new and in wrappers unless otherwised stated. All prices are shipped to the lower 48. If you have any questions feel free to PM me, but I would probably respond to e-mail faster. kevinpatterson400@earthlink.net . Thanks.

KTM Hard Parts

Front Brake Rotor - 100

Rear Brake Rotor - 75

Steering Flag - 50

Rear Brake Caliper Braket - 50

Rear Brake Stay - 50

Killswitch Tether - 10

Oil Cap - 2

Set of Front Brake Caliper Seals - 100

Axle - 200

Front Sprocket Guard - 15

2 Swing arm skid plates New - 30 / Used - 20

Rear Brake Lever - 70

Front Hub Assy. - 60

Rear Master Cylinder Push Rod - 5

Chain Guide - 20

3 Steering Stem Bushings - 5 ea.

2 Adjusting Screws and covers for clutch lever - 20 ea.

3 Head Gaskets for 525xc - 15 ea.

3 Head Gaskets for 450xc - 15 ea.

4 Clutch Cover Gaskets (o-rings) - 5 ea.

3 Stator Cover Gaskets - 5 ea.

5 Base Gaskets - 3 ea.

1 Used Heim Joint for A-arms (straight and in great working condition) - 25

2 Clutch Assy Locks - 5 ea.

Set of Brake Rotor Bolts - 5

11 Sets of Front Brake Pads (Each set is 2 pads to do ONEcaliper) - 30 ea.

8 Steering Stem Bushing O-Rings - 2

1 Sets of Valve Cover Gaskets - 4/set

3 Water Pump Gaskets - 2 ea.

2 Timing Chain Adj. Gaskets - 2 ea.

5 Sidecover Gaskets - 7 ea.

2 Rear Hubs - 25 ea

2 Sets of Balljoints - 80/set

2 Sets of Snap Rings for Balljoints - 5/set

3 Front Wheel Bearings (Outer) - 5 ea.

3 Front Wheel Bearings (Inner) - 7 ea.

3 Front Wheel Seals (Inner) - 5 ea.

3 Front Wheel Seasl (Outer) - 4 ea.

2 Front Wheel Bearing Spacers - 3 ea

Shifter - 10

Set of Tie Rods with Ends - 150

Set of used Tie Rods with Ends (Straight) - 75

Set of Tire Rods No Ends - 40

3 Steering Stem Bearings - 10 ea.

Steering Stem Bearing Dush Seal - 5

2 Battery Boxes - 10 ea.

Set of used, but good, Front Caliper Pistons and Seals -50

Keyswitch Assy. - 50

Chain Slider - 5

Swingarm Circlip -2

Axle Nut - 7

1 Throttle Cables - 50 ea.

2 Sets of Plastic (Front, Fenders, Rear Fender, and Shrouds, no hood) - 250/set

Set of Used Plastic (no cracks, with maier hood) - 100

2 Sets of Clutches (Fibers, Steels, and Springs) - 110/set

3 Sets of Clutch Springs - 5/set

Cylinder (Used, but in decent shape. May need replated) - 150

KTM Quickfill Dump Can to use with stock tanks - 150


Aftermarket Parts

2 Sets Rath Racing Comp Series Nerfbars with heelguards and Monster Pegs (Top of the Line) - 400/set

Yuasa YTX5L-BS stock replacement battery - 40

Yuasa YTX4L-BS battery (smaller, great for 24 volt setup) - 40

[staakej]

Do you know if the air filters fit the SX model also. If so I take 3 of them. thanks

[harescrambles]

I want the (IMS Tank with Dry Break Reciever),, and the 13 front sprocket if it works on a 450........ do you have paypal?

[cheetah]

Originally posted by staakej
Do you know if the air filters fit the SX model also. If so I take 3 of them. thanks

Yes they are the same. Paypal is kevinpatterson400@earthlink.net or pm me if you want to send payment another way.

[staakej]

send money for filters via paypal thanks

[staakej]

would you be willing to sell just the front wheels and if so how much thanks

[staakej]

got the filters today thanks agian