Results 1 to 3 of 3

Thread: Need Help Kasea 50

  1. #1
    Join Date
    Apr 2005
    Posts
    9

    Need Help Kasea 50

    I have a 04' Kasea 50 with oil injection removed, battery removed, Koso intake and 20mm Keihn carb. Everything else is stock. My problem is that it will not start, it has sat for a couple of years.

    1. Drained fuel
    2. Added fresh fuel
    3. New plug
    4. Have spark
    5. Cleaned carb
    6. Checked compression (140 psi) not sure what is normal
    7. Check reeds and intake

    Still will not start!! It will not even attempt to hit. I am leaning toward it being something electrical but not sure where to start. Any ideas???


    thanks

  2. #2
    Guest

    Clean Carb put fuel filter on it

    Clean your carb better if it is getting spark chances are wiring is good. Sounds like its not getting any fuel take out all of the jets get carb cleaner with the straw and run it threw every hole in your carb. Then let us know how she runs thats the problem. Hope this helps. Check and see if there is a fuel filter if so change it also.

  3. #3
    Join Date
    May 2009
    Posts
    43
    on a kasea it has a manual fuel pump you have to prime the carborator you can stick your hand over the end of the carb to do this
    Les Engelhart
    G-Force Powersports
    gforcepowersports@gmail.com
    253-961-3733
    800-658-1843

    Cody Engelhart #911
    G-Force Powersports
    Jahner Built Engines
    Flexx Bar
    Fox Shox
    Snyder Motorsports
    XFR Nerf & Bumper
    Motoworks Exhaust
    Maxium RPM
    Maier Plastic
    Burgard
    ASV Levers
    RPM Dominator II
    Kens Powder Coating
    DynaTech CDI
    Terry Cable Dual Gasser
    Velocity Intake W/ K&N

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •