Depends...Originally posted by RIDEREDson
Mine runs good and fires right up, but I feel like its bogging a little. Would that mean its rich or lean?
Depends...Originally posted by RIDEREDson
Mine runs good and fires right up, but I feel like its bogging a little. Would that mean its rich or lean?
sounds like its rich
fan cooled 416
Je10:8:1Piston-HotRodsRod-Crf450TimingChain-KibblewhiteValves/Springs-HotCamsStage2-CometicGaskets-GttStuds-HMF Slip-on/GrindedHeaderWelds-WbRevBox-
PRM Skids-Pro Armour Nerfs-Pro Design Tether-UNI filter-YFZ450 Shocks up front-Race Tech revalved Zps Dual Rate in back
Rear:kenda knarleys
Front:kenda KLaw xc
On DouglasQuadRoks
ZR,
Thank you for the suggestion. I was thinking of doing that samething. Just needed confirmation from the PRO. I will probably try that this weekend. I will let you know how it goes.
armoredman
01 400EX (some mods mostly bolt-ons) (Son's)
05 450R (bone stock)(Mine)
05 400EX (Wife's)
" THE RECIPE FOR SPEED IS ADD MONEY AND STIR"
Ok I am home and looked at the quad again.Originally posted by zrpilot
First loosen the float bowl drain screw to see if gas is in the the float bowl. IF so, it will run out the drain tube all over the ground. That is the first place to start.
Report back.
I am having issues with the float. I'm not sure how the assembly goes. I need a diagram or something I'm using an awful one. When I blow into the fuel line no air gets through at all. I have traced it to the plunger thing and the float.
EDIT:
I got it. Simple installation error
1999 Trx440ex: SOLD
2005 Trx450R: HRC, FMF, G-Force, Cobra, Burgard
Food for thought:
*Jet kits are not upgrades
* DG accessories are nothing to brag about
*Top speed is worthless
So how are you guys adjusting the fuel screw with it idling?
Member of ATVriders Daycare
I use a Motion Pro 90 degree tool. Some would say it is expensive, but it is some of the best dollars I have spent on motorsports.Originally posted by RIDEREDson
So how are you guys adjusting the fuel screw with it idling?
heres my deal i just rebuilt my quad to a 416 11:1 stage 1 cam filter and full yo**** exhaust. i had the 450 cab on the stock bore and i think i need to up the pilot jet now correct? it idles rough and it kinda hiccups back through the carb. also what does the air screw look like on the 450 carb? is it the black cable coming out to the stator side of the machine? also the head pipe got a little red while i was playing with that screw on the black cable if you know what im talking about i put a 175 main in it what should i be looking at for a pilot??
BURNT PISTON RACING...NOT A BETTER TEAM IN THE WORLD!!!
THE MAYOR
Originally posted by Ryan'07400ex
I'd like to find that thread... do you have the url still?
Thanks
And does a 152 main and 42 pilot sounds good with a hmf slip on, ground down header welds, uni filter, +6 key? I don't know whether to leave air lid on or off with this eihter
Thanks
Ryan
2008 YFZ450 Gray/Red
Pro Armor bumper
Dr.D slip-on exhaust
Twin Air Filter
Blingstar sprocket and rotor guard
ITP Quadcross XC rear tires on Tech 3 Hipers
Black Outs!
2007 TRX400ex Sold http://nwmx.weebly.com/index.html
HondaRidinRyan (youtube), commander1ryan (xbox live)
I just jetted my ex changing it from stock to a 152 main and a 42 pilot. I thought I read that the pilot jet needed to be turned out some instead of tightened all the way. It sort of stumbles when I hit the throttle in the lower than 1/4 range so im thinking I should fo tightened it all the way.
Does that sound like it would cause that? a loose pilot jet...
Ryan
2008 YFZ450 Gray/Red
Pro Armor bumper
Dr.D slip-on exhaust
Twin Air Filter
Blingstar sprocket and rotor guard
ITP Quadcross XC rear tires on Tech 3 Hipers
Black Outs!
2007 TRX400ex Sold http://nwmx.weebly.com/index.html
HondaRidinRyan (youtube), commander1ryan (xbox live)
can jetting make your bike skmoke?
[2004 400ex] [razr 2 backs] [razr mx fronts] [hmf slip on], [k&n] [moose bars], [ Acerbis handguards], [nerfs]"dont know wat they are, bought em off a buddy" [ac racing bumper] [junk works shocks] [ams aerospeed paddles]
---------------------
wishn list
*450r shocks
*pro armor dominator
*full skid plate
*new nerfs w/ heal gaurds
*426ex