Does anyone know the stock size main jet for a 99 300ex?
I am going to run a modified airbox and choke removal.
What size should i change the main jet to acomodate this?
Thanks in advance.
Does anyone know the stock size main jet for a 99 300ex?
I am going to run a modified airbox and choke removal.
What size should i change the main jet to acomodate this?
Thanks in advance.
How can you roll....when the wheel won't go??
---------------------------------------------
2000 400ex
Modified stock pipe
Uni airfilter
PRM skidplate
Razor tires
Moose bars
Call a Honda dealer, ask for the service department.
2000-440ex Stroker--Fan Cooled
Houser +1 A-Arms, Elka Triple rates, Laegers +1 1/4 Swingarm, G-Force Axle w/Durablue Anti-Fade Locknut, 14/36 Gearing, DID X-Ring Chain, C&D Revalved Rear, Maier Silver Plastic, Steel Grey PCed Frame, SPAL Fan, AC Bumper, Pro Armour Footpeg Extensions, Renthal Bars, Yoshimura Full Exhaust, 450R Carb w/ZR's Adaptor, K&N w/o Lid, Powroll 440 Stroker w/stg 3 HC, P&P Head, HD rod, GT Thunder HD Studs, and Timing chain, AMR Monster Coil, 4 Degree Advance Key and a 12oz lighter flywheel. Now at 12.5:1 Compression!
450R Front brake upgrade using 06-up Spindles and 07' hubs.
450R Rear Brake Upgrade
Kenda Knarly XC Radial 21x11x9 Rear Tires
Shorai Lithium Iron Battery
Running E85--Jetting: 70 pilot, 240 main, HRC needle on bottom notch and shimmed.
I looked it up at ronnies.com on the microfiche, it show a
#122 main jet and a #38 pilot jet. The fiche is usually right.
2001 Red 400EX
AC chassis and swingarm skids, shockwears, Uni filter and airbox mod, 165 main 40 pilot jet, WB E-series, alloy bars cr bend, WB blockoff, yz lever and perch, GCD (tinner's) air scoops.
Other ATV'S
01' Scrambler 500 (for sale)
yep its a 122 my friend has a 300 with a pipe, k&n, and no lid and he runs a 128, 40 pilot.
#71
2000 Roll/Laeger's/Houser/Axis 416ex
2001 Arens/Laeger's/PEP 250r
Thanks to my sponsors for 2003 : 00-Buck ATV Racing, Team Pompton, Nebulae Race Team, Milton Inn Packaged Goods, Napa Auto Parts of Oak Ridge, Sick Style Racing, WD-40, Hinson Racing, IMS, Sport Center Racing, and Nac's racing
I'd also like to give a special thanks to Baldwin Motorsports for all there help and support they gave me.
We are now accepting resumes, this is a New Jersey based team. westsyder50@hotmail.com
http://www.geocities.com/sickstyleatv/index.html
Team Rcokford Fosgate 401+ northeast champ 147.7db
Thanks alot guys....this will get me a good start!!!!!
How can you roll....when the wheel won't go??
---------------------------------------------
2000 400ex
Modified stock pipe
Uni airfilter
PRM skidplate
Razor tires
Moose bars
Hey that ronnies page is great! I can't wait to break something to use that again!