Results 1 to 4 of 4

Thread: Warrior problems...

  1. #1
    Join Date
    Nov 2008
    Location
    Danbury,ct
    Posts
    293

    Warrior problems...

    Heres the story....Rode my warrior for a few hours..in mainly mud. Came home washed it and road it around put it away for the night started it up again the next day no problems. Today..which is about 5 days later..started it up no problems idles but when about 3/8's throttle back fires like a ******. Replaced spark plug, cleaned air filter,and replaced gas..took carb off and very clean inside....sum up of story quad will not run after 3/8 throttle. Any help????? I really want to bypass the dealer. I also check all connections
    Onto my 7th 400ex won't stop until they are extinct!!

  2. #2
    Join Date
    Mar 2008
    Location
    Iowa
    Posts
    145
    if its backfiring, its probably loading up. check to make sure you have sufficient spark and have your stator tested. possibly the cdi also, but first, check the parking brake wiring. try putting the 2 wires from the parking brake together with a wire nut and see if that helps before you test the stator.
    "The Cowboy"
    '96 built to the hilt warrior

    cardomain.com/id/glass_cow

  3. #3
    Join Date
    Nov 2008
    Location
    Danbury,ct
    Posts
    293
    Thanks, It was my parking brake wiring. Thanks
    Onto my 7th 400ex won't stop until they are extinct!!

  4. #4
    Join Date
    Mar 2008
    Location
    Iowa
    Posts
    145
    glad i could help buddy
    "The Cowboy"
    '96 built to the hilt warrior

    cardomain.com/id/glass_cow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •