Marty, the 300 frame is all done. Reinforced the pivot bolt area on the weak side. See you al next week.
Marty, the 300 frame is all done. Reinforced the pivot bolt area on the weak side. See you al next week.
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
Pap,
300ex swingarm, shock relocator and 450 r bottom a-arms are on their way.
Colors;
White- frames, sub frame, upper a-arms and 300 shock relocator
Red - lower a-arms, swing arms, stems
If I forgot any parts let me know
I need to know the color for the front and rear hubs
Will be expecting the parts in
Everything here is stripped except the swinger, might have to send that via Fed Ex but will have a large batch ready for pick up by you guys this coming weekend and should have the parts being sent completed as well. Will do my best to have it all done, just filling you in incase you dont see the swing arm with the rest of the completed parts.
I wont be here after mid week, but Bridget and the boys will and I will pm you a total etc. Kevin may be here as well but there will be plenty of help to load up etc.
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
Pap,
I didn't know the kids sent hubs, If they sent the hubs for both bikes do them red, if they only sent 1 set just skip them unless you already started working on them. In a perfect world I would like to get everything Friday night so I can get the bikes together by Sunday, keep me posted as we move along this week.
Thanks,
Marty
Just 1 set was sent, and they are stripped so red they shall be
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
I guess I'll be sending the other set if I can catch the other stuff at the ups store
Marty...I have a set of 400ex front hubs stripped and ready for coating if thats what your using on Zaks 300. I can just swap out with you to save time
Everything that is here is now stripped and ready for coating including the swinger
The red stuff will probably be doen tomorrow and I will shoot white on wednesday
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
That will work, I missed the ups guy to send his hubs down.
Marty, I was wrong so its ok...they did not send hubs down. I saw a set stripped next to your pile of arms/stems and assumed they were yours but they are lableds for someone else so no worries
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News
Ok boys....other arms, swinger and jb bracket arrived, all now stripped and ready for coating. That will have to wait till the morning...im pooped
Staff Photographer ATVRiders.com
Senior Photographer ATVInsider
Staff Photographer GNCC Racing/ATV MX
Staff Photographer Vurboffroad
Staff Photographer Cycle News