We have recently recieved the new Pro model and did a little comparison with some photos.
First noticable difference would be the Linkage arm it is 3/8" the standard model is 1/4" thick.
We have recently recieved the new Pro model and did a little comparison with some photos.
First noticable difference would be the Linkage arm it is 3/8" the standard model is 1/4" thick.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
Lines of the stabilizer are noticably sleek. The housing is thicker for added strength. Additional seals have been added to the adjustment knobs to further seal them from dirt and debri.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
Pro Model will have an internal reservoir, much like a shock absorber reservoir (piggy back). The new reservoir will compensate for the thermal expansion of fluid increasing the damping on warm days by over 100% compared to the standard model.
Even with the added reservoir and thicker linkage this model weights the same as the standard model
I hope to install this on our TRX450r soon to get a field test review.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
Were the linkage bushings updated?
From what I can tell they are the same design but are taller due to the increased thickness of the linkage arm.
C&D Racing, the official sponsor of ATVriders.com and your #1 aftermarket and OEM parts shop! 402-614-2508
1st place +30 2010 IATVHSS
#28 IATVHSS 09 Polaris 525S and 525IRS
1st Place Industry Class 2008 Heartland Challenge
1st Place Industry Class 2007 Maxxis 12 hrs
www.cdracingonline.com
check out the products we carry http://www.cdracingonline.com/sell.html
Precision racing now sends you the "pro" linkage when you call for a replacement. For 42 shipped you can get the updated linkage, bushings, seals, and bolts to retrofit the "old" stabilizer.
I just rebuilt mine with the kit. It is 38 plus 4 shipping to your door straight from Precision.
2 09 YFZ450R/X
2010 YFZ450X BBSE
http://www.racer-results.net/results...cer.asp?n=1497
http://escoremx.com/results/atvamx/2...cer.asp?n=5131
2011 GNCC/EXTREME sponsors:
GT THUNDER. BNR. HMF. RATH. CYCRA. TROY LEE DESIGNS. SCOTT. FASST. HIPER. PRECISION.
I talked to George today and there will be a stabilizer for the DRR,Cobra and the Raptor 250 coming avail. soon as well.
http://qjsimaging.com/
-2002 Duncan 440ex-
Yoshimura full system,JE piston(12:1),Stage 2 Hot Cam,Port,polish, +3 Chrome Burgards AArms ,Elka Suspension -Triple rate front and Rear,GT Thunder Rev Box,,Pro Armour Nerfs,Burgard beadlock rears,Orange Fullbore,Chrome Tank cover,Candy Purple PC,Blingstar Dana Creech Bumper
2007 Suzuki LTR450
FOX Shocks, JB Racing A-Arms, Silver Maier plastic, Quad Tech Seat Cover, BRM Offroad race numbers
2008 Raptor 250 BUILD IN PROGRESS!
Thank you 2010 Sponsors
and Contributers!!
Teixeira Tech,DWT, Fasstco Co., Maxima oils, Scott USA, Renthal, ODI, FLY Racing,Western Powersports, Promoto Billet, FOX Shocks,Maier Plastics,ODI,Rath Racing,ATV4-play
ASV,Motoworks,QuadTech,Streamline,
RockyMountain ATV,Powermadd,Les Schwab,QJ's Imaging