carrier bearings, seals

[trailrunner77]

03 kfx 400
need carrier bearings and seals.

prices and phone #

thanks

[burgard rep]

our number is 1-888-771-8600. Give us a call so we can get you the right bearings and seals.

[trailrunner77]

will call friday!!! for black friday pricing

[burgard rep]

sounds good and everyday at Burgard Cycle is black friday. haha

[trailrunner77]

i called earlier today, could you please call me back.
641.780.4770

thanks.

eric

[burgard rep]

thanks for the business the bearings shipped you should see them in a couple of days.

[trailrunner77]

got the bearings and seals today. thanks!!

is that a spacer that is also in the box? any tips and tricks to changing them out? never tackled this before

[trailrunner77]

got the bearings installed the spacer, i had to drill holes in it like the one that was insided the carrier,

i had a guy at my local shop take out the old ones and install the new bearings and seals. he had problems with the seals he thought that they are too big for the carrier? they went in but on the rotor side of the carrier there is a space between the bearing and seal is that correct?

i attached a pic.

[burgard rep]

do you have the old seal and bearings if so can you get the numbers off of them?

[trailrunner77]

i just saw your response, i will look for the #'s tomorrow on the seals.


ALSO i am needing a chain guard that bolts up to your swingarm. I want to run that style of guard and get rid of the skidplate for ground clearance.
the swingarm is on a 03 and its a +1 if that helps. don't know if you changed thru the years.

thanks for your time