300ex suspension on trx90 need opinions please or suggestions for cheap

[mcstore]

Robbs racing kit is much more than Diamond J! You will spend at least $1200 on shocks alone for the Robbs kit. For more info contact RobbsRacing.com

[86trizinger]

I am considering this kit but on the edge of getting my son justa new DRR.. Can you send me some pics of the modifications or post them here. My email is mnboyd@verizon.net

Thanks
Chris

[bnesbitt2]

On the diamond j kit you will need to make a flat bar to go between the upper a-arm mounts in the front and back to tie them together either drill holes and bolt in place or weld.on the upper shock mounts it only comes with one support bracket and this causes twisting,you cant add anather bracket in the back cause there is no room,so what I did was cut the spring off one of the stock front shocks and mounted it (the shock not the spring) between the mounts and it has held up great.this sounds goofy but but it will make sense if you decide to do it.

[86trizinger]

CAn you post a pic of this or email me one.

My email is mnboyd@verizon.net

Its hard to totally understand since I dont have a kit as of yet.

[mcstore]

[86trizinger]

What rear axle/ brake swingarm set is that? I am still trying to figure out the rear.

Thanks for the pics.

[86trizinger]

I was told I can use 400ex rear hubs to widen the rear out instead of spacers.. I bought a set and the xle size is a lot larger on the 400ex .. are Kasea rear hubs the only ones that will work?

[mcstore]

Originally posted by 86trizinger
What rear axle/ brake swingarm set is that? I am still trying to figure out the rear.

Thanks for the pics.

Axle = 300EX
Carrier = 300EX
Disk brake & carrier = TRX450R
Lock nut = TRX450R
Sprocket = TRX90
Spocket spacer = 14mm made myself to correct offset of chain

[86trizinger]

what about the rear swingarm.. Did you buy one premade or did you have it made yourself to accept the 300ex carrier.

[86trizinger]

Also is there any hubs that will directly change the wheel pattern over to 4/110 so I can use some wheels I already have.