Results 1 to 6 of 6

Thread: Front A-arm bushings...

  1. #1
    Join Date
    May 2008
    Location
    N.B Canada
    Posts
    128

    Front A-arm bushings...

    i was checking over the bike after a hard weekend of riding and noticed alot of play in the a-arm bushings. I was wondering if anybody has used something different then the factory bushings.
    06 Outlaw 500 (558)
    12.5 wiseco
    hotcams
    HMF sport slip-on
    K&N filter
    PRM six pack
    Pure Polaris nerf - bumper
    39 tooth

  2. #2
    Join Date
    Aug 2008
    Location
    Missoula, Montana
    Posts
    8
    I have the same problem with mine in the rear though. re grease em they will tighten up a bit
    2007 Outlaw 525 IRS

  3. #3
    Join Date
    Mar 2007
    Location
    blue springs missouri
    Posts
    282
    I use marine grease in all the zerks. I use the heaviest weight I can get.
    2007 outlaw 525 IRS (now a 540)
    Built by Poaris on 11/06
    Motor by Duncan Racing 1/08

    1987 Lt500R QUADZILLA (sold)

    2007 outlander MAX 400 (bought new 4/09)

  4. #4
    Join Date
    Dec 2004
    Location
    Edwads AFB, CA
    Posts
    66
    EPI makes bushings that are made from polyurethane. I used these with my stock arms and they didn't get sloppy like the stockers.

    https://www.erlandsonperformance.com..._Code=WE340025
    Predator owner since 2003

    2009 Polaris Outlaw 525S...in-work building.

    2005 Pedator
    Twin Air clamp-on, Edelbrock, Rath A-arms, Dyna FS, Rath Rear Hubs, PEP Shocks (built by Rath), Flexx bars, Hiper Wheels, Razr 2 Tires, P&P cylinder head (Nicholas Cycle), Rath Head Pipe, Pro Armor Kill Switch, Yoshimura slip-on, Pro Armor nerfs, JE 12.5:1 Piston, Trail Tech Dash and Endurance Computer, Home made radiator scoops and chassis skid, PRM Bumper and Grab Bar.

  5. #5
    Join Date
    May 2008
    Location
    N.B Canada
    Posts
    128
    Dcc1089..was there any cutting to the bushings u got from epi or were they an exact fit ? Thanks for ur input and help guys...Much appreciated.
    06 Outlaw 500 (558)
    12.5 wiseco
    hotcams
    HMF sport slip-on
    K&N filter
    PRM six pack
    Pure Polaris nerf - bumper
    39 tooth

  6. #6
    Join Date
    Dec 2004
    Location
    Edwads AFB, CA
    Posts
    66
    Greased them up and installed them. No cutting at all.
    Predator owner since 2003

    2009 Polaris Outlaw 525S...in-work building.

    2005 Pedator
    Twin Air clamp-on, Edelbrock, Rath A-arms, Dyna FS, Rath Rear Hubs, PEP Shocks (built by Rath), Flexx bars, Hiper Wheels, Razr 2 Tires, P&P cylinder head (Nicholas Cycle), Rath Head Pipe, Pro Armor Kill Switch, Yoshimura slip-on, Pro Armor nerfs, JE 12.5:1 Piston, Trail Tech Dash and Endurance Computer, Home made radiator scoops and chassis skid, PRM Bumper and Grab Bar.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •