|
|
Dont Tread on Me
ok heres a trick ive been doing for quiet some time and it has worked out well, its a cheap solution to raise your bars, however its not a duarastic lift. half of an inch i believe but its still a bar riser
4 longer bolts and a spare set of top clamps are required
step one remove bars and top clamp(s) i used a lonestar anti-vibe but this can also be done with the stock stem
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Dont Tread on Me
step two take a extra set of TOP bar clamps and flip them upside down and set them in the place of the old top clamp(s)
like so
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Dont Tread on Me
step 3, dig up or buy 4 bolts that will meet the new required length. and re-install bars with the old top clamp
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Dont Tread on Me
new bolt length, old bolt length
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Dont Tread on Me
heres a pic of the spare top clamps im talking about
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Dont Tread on Me
side view,, 2 bolts werent in in this pic thats why its gapped, ive used it like this for years and never had a problem
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
IT'S WHATEVER!!!!!!!!!
That will work but not the cleanest setup out there
2006 LTR 450
Power Commander, Cherry Bomb, Fuel Atv Airbox eliminator, Full Dasa Pipe, and 12/38 gearing, Hipers on all 4s w/ Razr 2s tires, GT Thunder XC a-arms, GT Linkage, HLS Shocks, Pro Armor- powergrip pegs, nerfs, and heel guards. Pro Armor- grab bar, bumper, and kill switch. Flexx Bars, Precision Stabilizer, BLingstar radiator guard, Cyrca handguards, Fuelatv gripper seat, Hot Cam(intake only)
Soon to Come: 08 throttle body, and High Comp piston. And hope fully a dyno tune for the PC.
Dont Tread on Me
lol,, hey it works
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
have any clamps lying around?
OXCRACING.COM
Thats actually not a bad mod. My buddy gave me the advice on that. I had a spare set of clamps from a Blaster that I put on my wifes Raptor 350. Worked out great. I wasn't looking for appearance,but rather function.
OXC #247
2011: Scott Optics, Hinson Racing, HRP Sports, DeRisi Racing, Houser Racing, HiPer , Rath Racing, MSR........................
HAULIN DONKEY RACING !!!
Posting Permissions
Reply With Quote