Results 1 to 2 of 2

Thread: 97 warrior starting problem!

  1. #1
    Join Date
    Jul 2008
    Location
    Gadsden, AL
    Posts
    4

    Question 97 warrior starting problem!

    Well I bought it last weekend knowing it had something electrical wrong with it. When I go to try to crank it with the electric start the engine turns and it has some clicking noise coming from the starter relay and the other relays, and it doesnt crank up. Ive tested to see if it is getting spark, and it does sometimes but sometimes it doesnt. Ive also used a screwdriver to connect the two bolts on the starter relay buy it does the same thing as when I press the electric start. Please help me in so anxious to ride it
    1997 Warrior - Yellow, Durablue rear axle, FMF MegaMax exhaust, FMF power bomb header, k&n kit.

    1988 chevy s10 blazer - white, lowered on 20s

  2. #2
    Join Date
    Jan 2003
    Location
    Liverpool ,NY
    Posts
    256

    no start

    make sure the battery is fully charged up. a weak battery will do that . With the machine in Neutral , Also put jumpers from a good battery (car,jumpbox or whatever) negative cable attached to the foot peg or frame and now the scary part carefully attach or touch the positive jumper to the starter connector bolt on the starter itself . If the starter works then be ready to disconnect the jumper cable from the starter immediately as the starter will continue to run if attached.If it doesn't work then your starter brushes might be worn and or the starter bushings may be worn . ALSO check for a disconnection of the wire attached to the reverse lever. also make sure the parking brake lever is fully bottomed in the "off" position
    Ride fast take chances!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •