Results 1 to 3 of 3

Thread: How to ride a wheelie Tut.

  1. #1
    Join Date
    May 2008
    Posts
    17

    How to ride a wheelie Tut.

    First step.

    Put on that Helmet you have been storing away for some time.

    2.
    You might want to find an open grassy field. becuase when you first strart you will porbably scrath the **** out of your exhaust pipes.


    Alright How to wheelie.

    NOTE: This is how I wheelie. please do not make any mena comments on this. if you have a better way share it.


    1. Pull the clutch. Shift to first.

    2. I push my throttle about a quarter of the way in.

    3. just let go of your clutch. You should bring your front up pretty high.

    4. You will need to be very familiar with your back break. This will save your life in a second.

    5. When you get up in the air. You will need to put pressure on the breaks and apply the trottle. If you go to far back just press the back break a little bit to bring your front in back down.

    Please leave good feedback. Thanks.
    All stock Banshee.

  2. #2
    Join Date
    May 2008
    Posts
    17
    please someone post a repl and tell how i did.
    All stock Banshee.

  3. #3
    Join Date
    Sep 2008
    Location
    N.E. Ohio
    Posts
    49
    I dont really recommend wheelies from a dead stop when ur tryin to explain to someone how to wheelie... I just recomment using first gear at a walking speed and just throttle it up or snap the clutch a bit... But good call on the rear brake.
    2007 400ex
    2004 400ex

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •