With aftermarket rims, what kind of lug nuts are you using? I wouldnt think that the stock ones would work seeing that they are just a nut with a washer.
With aftermarket rims, what kind of lug nuts are you using? I wouldnt think that the stock ones would work seeing that they are just a nut with a washer.
Front or rear? The front hubs dont use a normal lug nut. The studs in the hubs are a different thread than normal. But the ones used are tapered. Weird nuts, but will work with a tapered rim.
Waters Racing
Team Epic Can-Am #95 DS450
Can-Am, Epic, BRP, FMF, Maxxis, Fox Racing Shox, Douglas Wheel Technology, MotoX Nutrition, Tsubaki, Falicon Cranks, CP Pistons, Tag Metals, Quadtech, Velocity Filters, Precision Racing Products and Team RPM
for the rear. The can am rims fit perfectly on the stud, and the aftermarkets use a centering lug. I didnt know if I would eggshape the aftermarket rim with using that weird can am lug nut.
If you have a rim with a tapered hole, like a douglas ultimate wheel, you need to find a 10x1.50 tapered lug nut for the wheel. Every other quad out there uses a 10x1.25 wheel stud, but BRP needed to be different I guess. You can use the suck lugnuts for any other wheel as long as it sits flush with the wheel. Having a tapered wheel and not using a tapered lugnut, will eventually wreck the wheel, and it's very likely the wheel will become loose as well.