what company is boring the carbs for the ktms phone # names contacts help. bill13@charter.net
what company is boring the carbs for the ktms phone # names contacts help. bill13@charter.net
Sparks, Dasa, Pinit, and shredum from trx.org
KTM 450 XC
KTM 525 XC
OUTTY 800 MAX XT
OUTTY 800 XT
POLARIS RZR 800
SKI DOO REV XP 154 X
MOTO
HEADZ
RACING
1 530 927 9827
advertising removed
Thank you to my sponsors:
75 Designs, Rath Racing, FLY Racing, Fourwerx, Hinson, CP Pistons, Hoosier Tire, Atlas Brace, X Brand Goggles, Pivot Works, Motorex, H&H ATV, RynoPower, PRP
Thanks Patrick. I appreciate your shoutout.Originally posted by patrickj75
The KTM's can really benefit from the carb boring modification....
I've got two Pro KTM carbs right now I'm doing.......
Thanks again.
--------------------------
...Having a blast on my 70HP Dynojet tuned 500R!
Do you have to change jet sizes if you bore your carb to (43mm)??
And if so, what would be a good starting point?
Thanks
assuming you have other mods like an exhaust, cam, porting etc. you would bump up your main jet. I run a 172 main or somewhere around there, along with a 48 pilot.
Thank you to my sponsors:
75 Designs, Rath Racing, FLY Racing, Fourwerx, Hinson, CP Pistons, Hoosier Tire, Atlas Brace, X Brand Goggles, Pivot Works, Motorex, H&H ATV, RynoPower, PRP