Manual Clutch for Typhoon 125

[JBOYZ]

Has anyone put a manual clutch on the Xtreme Typhoon 125?
If so, what is needed to do this?

[azextreme]

dont waste your time or money to convert! Just get another engine! You can get one for $400 google pitbike performance. If you get one make sure its a 4up tranny 1d3up to many false neutrals.

[chopper400ex]

I have ran three different 125cc pit bikes side by side, and the Xtreme kicked the crap out of the other two. I'm just guessing, but I would believe the ebay motors are not going to keep up with the Xtreme.

Sorry Jboyz, I haven't put a manual on an Xtreme (so I can't help you there). I just wanted to let people know there is a difference in power on the 125 engines.

[JBOYZ]

I don't want to go with a different motor - would just like to find a way to put a manual clutch on the stock FYM motor. This engine runs too good to replace...

So far we have put the high compressions piston kit & race cam in & the performance CDI - this has made a huge difference....!

[azextreme]

Originally posted by chopper400ex
I have ran three different 125cc pit bikes side by side, and the Xtreme kicked the crap out of the other two. I'm just guessing, but I would believe the ebay motors are not going to keep up with the Xtreme.

Sorry Jboyz, I haven't put a manual on an Xtreme (so I can't help you there). I just wanted to let people know there is a difference in power on the 125 engines.

I'm not talking about the $400 pit bikes!

[chopper400ex]

Originally posted by azextreme
I'm not talking about the $400 pit bikes!

I was just trying to say FYM motors make more power than most 125 engines. The bikes that we lined up against the Xtreme were not "cheap" bikes. I didn't realize you can get a FYM motor on ebay for $400.

[guy310]

For the 125 you would need a CR3 pro stock crank, transmission main shaft, clutch basket, clutch side engine cover, clutch cable, and some other misc. small parts from what I understand. That would be the same relative setup as the FTX or super typhoon engine, just without the 146cc displacement. It would probably cost about $500 give or take for the parts and would obviously require a pretty complete teardown.