My son enjoying his new ride!
[IMG][/IMG]
[IMG][/IMG]
Still having FUN!!!!!!!!!!!!!
[IMG]
[IMG][/IMG]
My son enjoying his new ride!
[IMG][/IMG]
[IMG][/IMG]
Still having FUN!!!!!!!!!!!!!
[IMG]
[IMG][/IMG]
06 700r raptor, 05 250 recon, ,07 trx90/hetrick pipe, pw 80 yamaha,07 xtreme125 typhoon with evos 140 motor, thanks to wife for posting pics!!!
Nice pics! One of the best upgrades you can get for it is the VM26mm carburator. It was like adding a pipe to Jams bike and gave it power from bottom all the way to the top. Also, the camber/caster is off from the dealer. I readjusted them once I got the bike here.
If it'll run... I'm ridin'!!!
http://home.earthlink.net/~hotscott03/
Sons:
Jhamir "JAM" Scott #320
KX85
Sponsors:
Firepower Minis Motors
Pirelli
Artistic Apparel
Smith Optics
Athena
DeCal Works
PitPosse
AGV Helmets
Signs A Rama (Lakeland)
ASV Inventions
Dirtyfoot Adventures
O'Neal USA
TwinAir
OneNation Extreme
R1R Performance
C4 Suspension
At the bottom of the steering stem,there is a set screw,back it out and put lock-tite on it.Josh,s was loose as a goose when i came across it.Could have been bad news.
Also the two allen head screws where the tie rod make up to the hub.
The nerfs and bumper is not a bad decision either.Greg
If it aint broke,don,t give it to me,i,ll break it
There is pics so you know what i what was talking about.
If it aint broke,don,t give it to me,i,ll break it
Also, the throttle is pretty stiff. Take the carb off, unscrew the throttle cap off of the carb and cut the spring. I cut about 5 coils off and it made it much softer and wasn't giving Jam thumb pump. If you get aVM26 you'll have to do the same.
If it'll run... I'm ridin'!!!
http://home.earthlink.net/~hotscott03/
Sons:
Jhamir "JAM" Scott #320
KX85
Sponsors:
Firepower Minis Motors
Pirelli
Artistic Apparel
Smith Optics
Athena
DeCal Works
PitPosse
AGV Helmets
Signs A Rama (Lakeland)
ASV Inventions
Dirtyfoot Adventures
O'Neal USA
TwinAir
OneNation Extreme
R1R Performance
C4 Suspension
If you find the throttle cable is binding,cut the zip ties and free it up.When i changed Josh,s handle bars i realized that it had been binding.
I found that a throttle assembly from a 250,300 ex Honda will work.Greg
If it aint broke,don,t give it to me,i,ll break it