direct shifter?

[DMIRacing]

Does any one know if a company makes a direct shifter for the Warrior, that link system kind of sucks when you try to shift gears in a racing situation. thanks

[97WarriorRider]

check www.yfm350central.com they will have lots of information that you need

[gotwarrior]

I when i had my warrior.. I took a 400ex shifter and add some heat to it and bent it to make it fit.. it worked great.. just something you may want to thing about..

[DMIRacing]

I went on to yfm350central.com and found that they said a yz250 and yz250f, blaster and yfz450 shifter all work. Most of them seem to use the yz250(99-07) shifter. thanks for the help.

[54warrior]

Just modify the stocker.

Cut it, weld it, heat it up and bend it.

[Ogener]

I'm using a yz250 shifter and I think I ordered it for a 2000 yz. It works great, I'll never go back to that linkage.

[JonBsbB]

I know im bringing this thread back from the dead but, when any of you used a yz250 shifter did you have to modify it any?

[beastlywarrior]

Nope yz250 bolted right on

[Ba9801]

I had to modify mine but I have an 87 with a pull starter so I had to bend mine a bit to give the added clearance needed/