Has anyone removed the tubes over the stock rear axle and used axle locknuts instead?
Has anyone removed the tubes over the stock rear axle and used axle locknuts instead?
I don't think you can do that because that is what holds the sprocket and brakes to the axle housing. You can replace it with an apex axle or even cheaper, polish the tubes and get some hubs from Rocky Mountain for a 400 ex. Billet aluminum and adds almost 6 inches to the width.
Proud Sponsors Of:
#99 Conner Peavy /0-100 Stk Appearing
#36 Dalton Robinson /0-100 Stk Appearing
#2 Zach Briggs /Quad Youth
#333 Alexus Martinez /Mini Quad Mod
I don't think you can just thread the stock axle if that is what the question is asking. As cheater said you can polish the tubes or change axle. By the way the 400ex hubs only add about 2-3" overall, we have run them. They do make some difference.
"You gotta pin it to win it!"
08 Raptor 250SE #21
08 DRX2 50 (stock) #22
04 Pred 90 (stock)
04 1/2 Sportsman 500
Sponsors:
Linda's Lil Angel's Childcare(Mom), G-Force Powersports(drrnation.com)
Special Thanks to: Colsch Cycle "woodsracer22" (engine builder)
He is talking about some extended 400ex hubs...I got some...they are indeed wide.
The power of accurate observation is commonly called cynicism by those who have not got it.