Are the stock hubs strong enough to be taking the beating of a race track? tryin to figure out if i should get some nice LSR Hubs front and back or if my stock ones will be fine
Thanks, Nick
|
|
ROOKIE, WE HAVE A PROBLEM
Are the stock hubs strong enough to be taking the beating of a race track? tryin to figure out if i should get some nice LSR Hubs front and back or if my stock ones will be fine
Thanks, Nick
Hi I am Drew or Superman
your rims will prolly bend before your hubs... Spend you money on something a little more pertinate. Hubs can come later
--Yamaha Blaster-- (Sold)
--400ex-- (Sold)
Pro Armor Nerfs w/ Heel Guards
K&N A/F
HMF s/o
(QUAD) Shock Covers
Race Cut Plastics
Jetted Perfectly
42 Pilot
Pro Taper Grips
Maxxis Razr Mx Rear
Douglas rear's
Senior Member
They will be fine.
05' 450r with secrets
someone on here was saying that the stock rims are strongerthan all the aftermarket rims. I disagree but then again i nevr owned aftermarket rims
Dont Tread on Me
the stock hubs will handle just about anything.....
like stated above the rim will take all the punishment
Country Boy Can Survive
-97 F150-
400EX frame up build in the future.
Nut Up or Shut Up
A stock Honda rim will be stronger than say a Douglas .190 red label rim because it has a rolled lip. You would be surprised just how much stronger stock rims are because of this.Originally posted by FoxHondaRider
someone on here was saying that the stock rims are strongerthan all the aftermarket rims. I disagree but then again i nevr owned aftermarket rims
To the starter of this thread: the stock hubs will hold up without breaking a sweat
00' 400EX - GT Thunder 450 stroker, custom JE 12.5:1 piston,
+7mm stroked crank, HD stroker rod, HRC cam, GTT full race porting, +1mm intake valves, FCR 39 carb, CRF timing chain, Denso IXG27 iridium plug, full Hinson 8 plate clutch, Desert Toyz Supercooler w/ SPAL fan, UM airbox w/ UNI, CT Hi-Output exhaust, Roll LOBO II F/R, LT PEP 8 click ZPS piggyback fronts, PEP ZPS rear, YFZ brakes/450R master, CCP stabilizer, Hiper Tech beadlocks, Durablue X-33, TAG, Quadtech, ASV, AC, IMS, RAD, Works Connection, Galfer..
05' Kawasaki KLX 110 - Fast 50's springs F/R, HRC cradle, Rox risers, FLY fatbars, NGK CR6HIX iridium plug, Twin Air filter
__________
agreedOriginally posted by NacsMXer
A stock Honda rim will be stronger than say a Douglas .190 red label rim because it has a rolled lip. You would be surprised just how much stronger stock rims are because of this.
To the starter of this thread: the stock hubs will hold up without breaking a sweat
06 YFZ
03 400EX
Posting Permissions
Reply With Quote