Strange shock question

[anywhereEx]

I have a set of works tripple rates with rezzys for my ex and a friend wants to buy them and put them on is banshee. I have searched and not really found out much besides the fact that banshee shocks are a little shorter. That should not matter to much because he is going to +2+1 a arm so that should take up the extra lengh right? Also I know that the top mount will have to be shimmed a little but how much?

[Texan32]

the extra length added to the mounting point on the +2is minimal and will not make enough of a difference. Do the works have a threaded preload adjustment? If so, just unscrew them to get a good ride height. If not, you might try getting some slightly softer springs that will allow the shock to sag a little to bring the height down.

Just a suggestion...

[trx400ex]

nope, the banshee top shock mount is much wider than the 400ex top, you could fix that, but even after all the trouble, they wouldnt be setup for a banshee