Results 1 to 10 of 10

Thread: Liquid cool 50

  1. #1
    Join Date
    Jul 2007
    Posts
    150

    Liquid cool 50

    How are the new liquid cooled 50's running. Are you seeing any more power out of the crate than the air cooled? Is the stock head a metrakit? if not what kind of head comes on the machine stock?. Any other major changes?

  2. #2
    Join Date
    Nov 2006
    Location
    Saraland Alabama
    Posts
    248
    The stock dome config is very similar to the oem air cooled . The outer casting lends itself to a malossi. In the near future I'll see what gaskets fit correctly.

  3. #3
    Join Date
    Jan 2007
    Location
    FL
    Posts
    1,930
    Seems faster out of the box to me, but we haven't timed one or run side by side yet....
    G-Force Powersports

    OEM & Aftermarket Parts
    DRR/Apex Authorized Dealer

    Shop Online 24 Hrs a Day!!
    www.g-forcepowersports.com

    TEAM G-FORCE---Join Today!!
    www.gforceriders.com

    Contact:
    gforceatvs@gmail.com
    800.658.1843

    2011 Team Product
    Mach 1 R/T Exhausts

  4. #4
    Join Date
    Jan 2007
    Location
    FL
    Posts
    1,930
    Originally posted by wrhracing
    The stock dome config is very similar to the oem air cooled . The outer casting lends itself to a malossi. In the near future I'll see what gaskets fit correctly.

    I believe they pepped them up since the original shipment of liquid cooled 50s arrived in March...

    Our new one is much quicker than the previous liquid cooled 50 we had.
    G-Force Powersports

    OEM & Aftermarket Parts
    DRR/Apex Authorized Dealer

    Shop Online 24 Hrs a Day!!
    www.g-forcepowersports.com

    TEAM G-FORCE---Join Today!!
    www.gforceriders.com

    Contact:
    gforceatvs@gmail.com
    800.658.1843

    2011 Team Product
    Mach 1 R/T Exhausts

  5. #5
    Join Date
    Jan 2007
    Location
    FL
    Posts
    1,930
    I think we will have some solid feedback soon....

    Hear there may be a few of them running in the NEATV series soon
    G-Force Powersports

    OEM & Aftermarket Parts
    DRR/Apex Authorized Dealer

    Shop Online 24 Hrs a Day!!
    www.g-forcepowersports.com

    TEAM G-FORCE---Join Today!!
    www.gforceriders.com

    Contact:
    gforceatvs@gmail.com
    800.658.1843

    2011 Team Product
    Mach 1 R/T Exhausts

  6. #6
    Join Date
    Apr 2006
    Location
    maine
    Posts
    620
    1 ran and he came in 6th. Top end was there but low end seemed off, probably too early to tell as it is probably just brken in after this past weekend

    Personally I think the extra weight is an issue but as long as it is a lighter kid it is probably okay.


    interesting find thou on DRX rims, center needed to be cut bigger to fit ????
    Team Maine Racing
    Drew Blackstone 44x
    www.teammaineracing.net
    G-Force Racing/PCS Performance/DRT Racing/Coutt's Bros., Inc/Scott Goggles/ Crystyle Concepts/ Apex ATV/ RND Racing/ Hillside Performance/ Parks Performance

  7. #7
    Join Date
    Jan 2007
    Location
    FL
    Posts
    1,930
    Raise the needle 2 spot so the clip is in the bottom slot and it should help with the bottom...

    The Sunworld carb has a longer needle than the Mikuni carb that is usually on the 50s...

    Ours had a bottom bog until I adjusted the needle..



    Yes...The DRR rear wheels need to be cut....This will be fixed by the time the next batch arrives....Nice wheel except for the fit
    G-Force Powersports

    OEM & Aftermarket Parts
    DRR/Apex Authorized Dealer

    Shop Online 24 Hrs a Day!!
    www.g-forcepowersports.com

    TEAM G-FORCE---Join Today!!
    www.gforceriders.com

    Contact:
    gforceatvs@gmail.com
    800.658.1843

    2011 Team Product
    Mach 1 R/T Exhausts

  8. #8
    Join Date
    Apr 2006
    Location
    maine
    Posts
    620
    Those rims were very nice!!
    Team Maine Racing
    Drew Blackstone 44x
    www.teammaineracing.net
    G-Force Racing/PCS Performance/DRT Racing/Coutt's Bros., Inc/Scott Goggles/ Crystyle Concepts/ Apex ATV/ RND Racing/ Hillside Performance/ Parks Performance

  9. #9
    Join Date
    Oct 2006
    Location
    FLA.
    Posts
    531
    Those rims do look sweet. I like the rolled edge. They have very little weight savings over stock but look 10x better.
    Special thanks to 11-12 Sponsors

    East Coast Performance

  10. #10
    Join Date
    Jul 2007
    Location
    THE PODIUM !!
    Posts
    1,371
    your right ecmini, not light, but as i look at this stack of bent light weight douglas wheels , i am willing to trade weight for strength, these might be the last set of wheels you have to buy and they do look great !marc
    God bless,
    from your friends at Hot Quads
    334-705-0084

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •