I have an '07 drr 90 limited with the 41" wide front end.Will the 44" wide a arms work on this or did they change anything on the mounting area of the frame?Thanks in advance!
|
|
Why so serious???
I have an '07 drr 90 limited with the 41" wide front end.Will the 44" wide a arms work on this or did they change anything on the mounting area of the frame?Thanks in advance!
Senior Member
they moved the arm brakets a head on the third version and then addedd the 44 inch arms then. So if there is not much room to take out your spark plug then the 44 stock a-arms will not fit
but you can buy after market one for both versions just tell them which one you have.
Nichols Racing
#55
DRR 70
Nichols Atvs
Scootercraft
DC Motorsports
ElKA
Malossi
Maxxis
2010 Neatv 70 Limited 2nd
2008 champion 70cc rippin racing series 6-7
2008 champion 70cc rippin racing series 8-9
New this year
#45
50 limited
DRR 50
Registered User
I dont think any of the new frame 90cc atv's were ever 41", so your bike should be the earlier style 07 frame, which the stock 44"upper a-arms will not fit but the stock 44" lowers should fit , and a special upperconversion would be needed to complete. you would also need longer tie rods and shocks and brakel ines. we have done this conversion a few times .
marc
God bless,
from your friends at Hot Quads
334-705-0084
Why so serious???
Thanks guys.Mine is the one that has very little room for spark plug removal.I was just hoping to pick up some width by buying someones stock 44" front end since alot of people went to long travel.Looks like I'll stay with what I have for now.
Why so serious???
Can you provide me with what I need to do the conversion?If so,that would be great.Originally posted by hotquads1
I dont think any of the new frame 90cc atv's were ever 41", so your bike should be the earlier style 07 frame, which the stock 44"upper a-arms will not fit but the stock 44" lowers should fit , and a special upperconversion would be needed to complete. you would also need longer tie rods and shocks and brakel ines. we have done this conversion a few times .
marc
Registered User
YES
call me at 334-705-0084
marc
God bless,
from your friends at Hot Quads
334-705-0084
Why so serious???
Marc,thanks for your reply.I realize I would need the longer tie rods and brake hoses but I didn't know the shock length was different.Or did you mean stiffer shocks due to the extended width?I have 13" Elka dual rates on it right now.If I would have to buy longer shocks I would just go with the DC long travel set up.I am trying to widen it some and still use the shocks I have.Originally posted by hotquads1
I . you would also need longer tie rods and shocks and brakel ines. we have done this conversion a few times .
marc
Registered User
13" shocks are perfect, I thought you had the 12" stock shocks . you should be good to go . let me know when you are ready .
marc
God bless,
from your friends at Hot Quads
334-705-0084
Why so serious???
Cool.I'll give you a call and we can talk about the details.Thanks again.
Posting Permissions
Reply With Quote