Gearing

[Rcarroll]

Has anyone one tried running a 19 front sprocket and a 35 rear.

One of the tracks we race at has is very small. You go about 50 feet then there is a jump go another 50 feet then there is something else then 50 feet and a turn and so on, the longest straight strech is around 200 to 250 ft just wondering if this gearing would work better

[dblacks]

stock on all 06 models was 19/35

my 07 single a-arm was 19/35, i believe that all the newer 07's are the 19/32

I have had good success witht the 19/35 at certain tracks and I only change the front sprocket up to a 20 or 21 for more top end vs changing the rear to a smaller sprocet for top end.

I have even seen guys us 18/32 to get almost the same gear ratio as 19/35

I get them at Spacely's Sprockets lol

[hotquads1]

what size rear tire? and what cc bike?
marc

[Rcarroll]

90 cc with Hetrick B52 Kit 18" tires any suggestions on clutch and roller set up my son is about 75 lbs

[hotquads1]

I have sent you a PM
marc

[drr wizard]

sent you a message
drr wizard

[bulldogfallon]

You two guys always PM'ing each other....What about me? No love for the bulldog?

Why can't I get PMs too?

[drr wizard]

Originally posted by bulldogfallon
You two guys always PM'ing each other....What about me? No love for the bulldog?

Why can't I get PMs too?

bulldog , I have personally posted you notes on the oko carb posts, and you have not even responded, I called out for help as i stood on that pier , alone , desperate , but you never answered, this upsets me greatly, and now you wish you could get pms, thats a girl thing and most of them dont like it. but please bulldog if you do obtain this lofty goal, don't share it with us , this quaint little forum is where i come to escape the scary world of PMS.


MY GOD MAN , PULL IT TOGETHER ! LOL


I love you man,
your pal drr wizard

[Rcarroll]

Tried the 19/35 this weekend did not work out to good. Zach told me if I left it set up that way he would not race the second moto, added atleast 3secs per lap

[bulldogfallon]

How about 18/30 or 18/28


Would the smaller front gear allow the engine to turn anymore RPMs?