swingarm-shock

[cz440]

Well after 2 races on our stock drx 70 we broke something. The stock swingarm is bent and the rear shock is blown. Does anyone know my options this being a DRX ?

[hotquads1]

stock replacment parts are available , inexpensive ,but likely to happen again

we recommend the Elka shock with a reinforced racing swingarm, this will handle all your racing needs, purchase this one time and your done!
Marc

[ecmini1]

You can also gusset a stock swing arm. If your child is going to be aggresive time to up grade shocks and gusset the whole bike to be able to take the beating.

[Full Throttle00]

I agree, you can weld & gusset your stock one if you are in a pinch. I have gone thru 3 swing arms. Now have Elka rear tripple shock.
You better gusset the frame as well, with these new quads the kids are getting faster & jumping bigger....

Here is a few pics of a few high flyin' mini 70 & 90....

[Full Throttle00]

Weld gusset paint and powdercoat everything or it will get weak and break.. Just be careful or have a good welding shop do it or may cause another part of the frame to break.
Fox Shocks in Front / Elka tripple in the rear.
Nothing is guaranteed, but it's sure helps...

[bulldogfallon]

Originally posted by cz440
Well after 2 races on our stock drx 70 we broke something. The stock swingarm is bent and the rear shock is blown. Does anyone know my options this being a DRX ?

Check with your local dealer to see if you can get it covered under warranty if your not able to upgrade at this point.

What was the cause? The shock failure?