Results 1 to 4 of 4

Thread: pink wire!!!

  1. #1
    Join Date
    Jun 2006
    Location
    enid ok.
    Posts
    229

    pink wire!!!

    does it matter where i cut the pink wire? and does it matter on the 07 model? thanks for the help..
    06 700r raptor, 05 250 recon, ,07 trx90/hetrick pipe, pw 80 yamaha,07 xtreme125 typhoon with evos 140 motor, thanks to wife for posting pics!!!

  2. #2
    Join Date
    Jun 2006
    Location
    enid ok.
    Posts
    229
    i traced the two wires coming from the front sprocket and they went into a clip. i unplugged it but it doesnt start. im assuming it is a neutral safety switch. am i correct in saying to just cut this pink wire? but will it still start? it is not that big a problem to put it back together if it doesnt start but why do it if i dont have to. any help would be great. thanks
    06 700r raptor, 05 250 recon, ,07 trx90/hetrick pipe, pw 80 yamaha,07 xtreme125 typhoon with evos 140 motor, thanks to wife for posting pics!!!

  3. #3
    Join Date
    Apr 2007
    Location
    Massachusetts
    Posts
    13
    You need the Neutral wire connected, if you have sidecover removed just disconnect pink from switch. Remove rubber cover connection is spring loaded just put in a little and pull wire out. Then tap or cut off .

  4. #4
    Join Date
    Jun 2006
    Location
    enid ok.
    Posts
    229
    thanks so much. ive been looking around other sites and never really got a straight answer. thank you.
    06 700r raptor, 05 250 recon, ,07 trx90/hetrick pipe, pw 80 yamaha,07 xtreme125 typhoon with evos 140 motor, thanks to wife for posting pics!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •